The Volvo 480 looks good as is, but if you have the desire to give it a more personal look you can find out what others did to their 480 and be inspired.
Moderators: jifflemon, coyote1980, Rachel
-
Tiny
- 480 Newbie
- Posts: 23
- Joined: Wed Jan 05, 2005 10:49 pm
- Location: Cornwall, England
Post
by Tiny » Fri Oct 21, 2005 8:13 am
Hi All
I have a stainless steel duplex de-cat exhaust on a j plate turbo,
does any one know if it can be tweeked to fit a 2.0 litre m plate?
Your help would be appreciated as it is only a few months old & cost £450 & some dick head has written the car off!
Cheers Tiny
-
martinholmesuk
- Friend of Club 480 Europe
- Posts: 10049
- Joined: Thu Sep 05, 2002 9:43 pm
- Location: West Sussex
Post
by martinholmesuk » Fri Oct 21, 2005 9:01 am
afraid the pipe size is not the same on the 1.7/1.7turbo/2lt
maybe weld a reducer on?
Volvo 940 Turbo 19T (real Volvo :P)
Audi TT
-
lee
- 480 Is my middle name
- Posts: 1680
- Joined: Thu Jan 23, 2003 8:24 pm
- Location: Sheffield, uk
Post
by lee » Fri Oct 21, 2005 11:46 am
It is possible to weld a reducer on (I've done it) you may however loose a slight bit of back pressure due to the extra half inch of bore. But it would work with a little modding.
Who was it that made the exhaust in the first place?
If its possible here at HOMD we make it real
hmmmmmmmmmmmmmmm
-
Tiny
- 480 Newbie
- Posts: 23
- Joined: Wed Jan 05, 2005 10:49 pm
- Location: Cornwall, England
Post
by Tiny » Fri Oct 21, 2005 12:32 pm
Hi guys
Thanks for the info the exhaust was made by performance cars
(powerflow).
Tiny