Both manual and automatic transmission are discussed here, including the clutch!
Moderators: jifflemon, coyote1980, Rachel
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Sun Aug 28, 2005 1:38 pm
Finally!! long nose pliers & a good hard tug (oooer) got the speed sensor out
but...... the diaphram springs are covered in a film of black oil.
is this bad?
![Image](http://freespace.virgin.net/al.fonzo/share/ermm.jpg)
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
Bramdeman
- 480 Expert
- Posts: 656
- Joined: Fri Feb 20, 2004 8:52 pm
- Location: Pole position on the highway!
Post
by Bramdeman » Sun Aug 28, 2005 9:24 pm
Its ok as long as it doesn't get worse and makes the clutch slip. But since you have the gearbox out it would be smart to fix it now. Take the clutch of the flywheel and then take the flywheel of the engine. Have a look at the crankshaft oilseal Thats problebly where your leak is.
'99 C70 2,3 T5 LPI Full option!
'98 V70 2.5Turbo LPI aircon ice etc etc <---Wrecked, she saved my life
'82 Porsche 928S 300HP 4,6V8 (scary)
'89 Red Turbo All Fixed up SOLD
'90 ES Lavender Metallic Automatic
'93 Two Tone Turbo!! Beauty! daily driver
'92 Red ES automatic
'88 340 1,7 Project car
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Mon Aug 29, 2005 10:11 am
ah, right, think that was mentioned that before, is it just a case of gouging out te old seal & pressing in the new?
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
Bramdeman
- 480 Expert
- Posts: 656
- Joined: Fri Feb 20, 2004 8:52 pm
- Location: Pole position on the highway!
Post
by Bramdeman » Tue Aug 30, 2005 10:23 pm
Yeah should be, pull out the old one and carefully hammer in the new onee. Grease it up with motoroil first.
'99 C70 2,3 T5 LPI Full option!
'98 V70 2.5Turbo LPI aircon ice etc etc <---Wrecked, she saved my life
'82 Porsche 928S 300HP 4,6V8 (scary)
'89 Red Turbo All Fixed up SOLD
'90 ES Lavender Metallic Automatic
'93 Two Tone Turbo!! Beauty! daily driver
'92 Red ES automatic
'88 340 1,7 Project car
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Wed Aug 31, 2005 7:40 am
okay, cheers
![Smile :)](./images/smilies/icon_smile.gif)
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
rpruen
- Friend of Club 480 Europe
- Posts: 2299
- Joined: Wed May 26, 2004 9:09 pm
- Location: Near Bristol (uk)
Post
by rpruen » Thu Sep 01, 2005 9:24 pm
The seals are not that easy to remove.
Best thing is to screw a self tapping screw into the flat part of the seal, then use a claw bar, or claw hammer to gently pry the seal out. It may take a few goes, but it's less messy than trying to mangle the seal with a screwdriver. IT's also less likely to scratch the part of the crankshaft the seal runs on (that would not do the new seal any good).
Richard
Car Status: Squashed :(
Now have 765 GLE 2.8 V6
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Fri Sep 02, 2005 12:41 pm
thanks rich, that makes good sense
cheers
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Thu Oct 20, 2005 1:51 pm
hey, i got me box!!
45 notes + found a cheap courier see below, 8.75 + vat next day!!!!
http://www.interparcel.com/courier-quote1.php
hopefully have a go at fitting this weekend
![Hopping Happily :hopping:](./images/smilies/hopping.gif)
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
Dan the 480 Man
- 480 Is my middle name
- Posts: 2269
- Joined: Thu Jan 08, 2004 7:42 pm
- Location: No longer in a Volvo...(But not forever!)
-
Contact:
Post
by Dan the 480 Man » Thu Oct 20, 2005 6:48 pm
![Shocked :shock:](./images/smilies/shocked.gif)
Thats a bloody cheap courier!
[size=75]My website: ::: [url=http://www.dcmoore.co.uk][color=black][b]dcmoore.co.uk[/b][/color][/url] :::[/size]
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Sun Oct 30, 2005 5:10 pm
PLEASE tell me ther arent 2 sizes/pitches of splined drive shaft that fit into the gear box. (off side)
![Stupid :wall:](./images/smilies/wall.gif)
been wrestling with this gearbox all afternoon & have barely got any skin left on my arms, I just cant get the drive shaft to engage.
help
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
chris1roll
- Friend of Club 480 Europe
- Posts: 3927
- Joined: Wed Feb 12, 2003 6:50 pm
- Location: Using LOTS of petrol!
Post
by chris1roll » Sun Oct 30, 2005 9:39 pm
The splies are set so it is possible to be 180 degrees out. Turn the driveshaft half a turn and try again.
2001 V70 XC 2.5T
1989 744 GL Auto
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Mon Oct 31, 2005 5:55 am
I'm sure i tried that, but arm fatigue may have affected my brain so will give it another go
cheers you
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)
-
pol
- 480 Is my middle name
- Posts: 2794
- Joined: Wed Jan 22, 2003 10:48 pm
- Location: Eastbourne
Post
by pol » Mon Oct 31, 2005 8:36 am
I've never had a problem with them. They slide on pretty easy. Maybe worth checking the splines haven't been dropped and bashed about?
Not sure about different sizes though. Good luck.
pol
-
alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
-
Contact:
Post
by alfonzobonzo » Mon Nov 07, 2005 8:20 am
got the box in, in about 3 minutes on saturday, dunno what went wrong the other day, i must have just been being crap,
the shaft doesnt have to be orientated in any way whats so ever, exept obviously you want the holes to line up.
Alfonz.
Toyota Celica G7 Tsport Storm Blue (LiftTastic)
480 L 1994 2.0 i Metalic Black K&N Panel SOLD (fond memories)
V40 W 2000 1.9 T4 SOLD (kind of miss it)