rear bumper removal 480ES 1994

Everything that doesn't belong in the previous categories probably belongs here. Interiour (how are the seats mounted? how to remove the CEM?) and exteriour (how to replace the popup-lights shock absorbers or a door) are discussed here!

Moderators: jifflemon, coyote1980, Rachel

Post Reply
andyb2000
Started learning about 480
Posts: 62
Joined: Wed Sep 12, 2018 12:04 pm
Contact:

rear bumper removal 480ES 1994

Post by andyb2000 » Fri Mar 27, 2020 1:17 pm

Hi folks,
My ongoing quest against rust (am I winning? not sure, will tell you when I weld most of the rear outer sills)
But, am I right in thinking the rear bumper comes off by unbolting the two bolts just behind rear wheel underneath (that bolt into metal in the arch - or at least would if anything left of them) and then the screws, one recessed at each side of bumper then the row on the metal bar along the middle?

Photos may help:
Image

Image

Thank you!
Thanks for all your help! - Andy
Volvo480 ES 2.0 petrol - 1994 (UK RHD L-reg)

jifflemon
480 Is my middle name
Posts: 2563
Joined: Sat Dec 17, 2016 11:03 am

Re: rear bumper removal 480ES 1994

Post by jifflemon » Fri Mar 27, 2020 2:41 pm

See here

andyb2000
Started learning about 480
Posts: 62
Joined: Wed Sep 12, 2018 12:04 pm
Contact:

Re: rear bumper removal 480ES 1994

Post by andyb2000 » Fri Mar 27, 2020 3:36 pm

Aha! perfect, I missed that. Thank you :-)
Thanks for all your help! - Andy
Volvo480 ES 2.0 petrol - 1994 (UK RHD L-reg)

User avatar
WalkableBuffalo
480 Newbie
Posts: 44
Joined: Thu Jan 02, 2020 9:04 pm

Re: rear bumper removal 480ES 1994

Post by WalkableBuffalo » Fri Mar 27, 2020 4:27 pm

Took me at least several days once it was off, spraying and testing the screws to get the metal strips off.
They can be an absolute bugger but enough penetrant and pressing hard on the screwdriver they will come off, tightening it and then loosening can also help.
The screws/mounts for the rear mudguards on mine were also well gone, which left some nice holes in my boot. Still not sorted a new fixing for them yet either.
Best of luck!
-Will
1991 480 ES, 1.7, Arctic Blue
Current status: No MOT, 99% ready I swear

Alan 480
480 Is my middle name
Posts: 1519
Joined: Sun Aug 28, 2011 9:03 am
Location: Aberdeen

Re: rear bumper removal 480ES 1994

Post by Alan 480 » Fri Mar 27, 2020 7:52 pm

WalkableBuffalo wrote:
Fri Mar 27, 2020 4:27 pm
Took me at least several days once it was off, spraying and testing the screws to get the metal strips off.
sod that , angle grinder to cut slots for a flat head OR chop the heads off :-)
the end ones just bend the metal tabs off and then the skin will wiggle over it so you can get a grip of the remains with vice grips
WalkableBuffalo wrote:
Fri Mar 27, 2020 4:27 pm

The screws/mounts for the rear mudguards on mine were also well gone, which left some nice holes in my boot. Still not sorted a new fixing for them yet either.
try builders reinforcing strips, use for the droplinks and they are galvanized :-) I posted a link to them previously
Alan

480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1

Post Reply