Hi folks,
Got a B20F engine for sale - running and on 138k miles looking for £150 and for this you get:
Engine - bare with no ancillaries but comes with inlet and exhaust manifold/downpipe
Sensors - sensors required to run the engine but not those that supply signal to the info centre (keeping these as spares)
Coil Pack
Wiring loom - engine loom only not full car loom
ECU
I'm located in NE Scotland about an hour from Aberdeen and I can arrange to have it palletised if need be however collection preferred but I understand that's probably an impracticality!
any questions - just ask!
B20F Engine (+ poss engine loom and ECU)
Moderators: jifflemon, coyote1980, Rachel
-
- Can tell where the 480 was built
- Posts: 313
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
B20F Engine (+ poss engine loom and ECU)
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
Re: B20F Engine (+ poss engine loom and ECU)
Fraser
What would you charge for storage of said engine etc?
now that I have a pair of 480 and both have high mileage a spare could be useful:-) ditto gearbox in red one is getting 'dour' to engage first/second
I have some room under the freezer now that the Regal engine/box have left for new owner, but unsure if the engine would fit in that space
What would you charge for storage of said engine etc?
now that I have a pair of 480 and both have high mileage a spare could be useful:-) ditto gearbox in red one is getting 'dour' to engage first/second
I have some room under the freezer now that the Regal engine/box have left for new owner, but unsure if the engine would fit in that space
Alan
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
-
- Can tell where the 480 was built
- Posts: 313
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
Re: B20F Engine (+ poss engine loom and ECU)
Hi Alan!
I'd need to assess space myself! that's partly my reason for a wee clear out! haha, would you like me to do a measure? i'll be at the unit tomorrow night so can measure it all up if you required, had planned on keeping the box as a spare but I've got another 2 from 1.7's that "would do if required" as spares for myself so you'd be more than welcome to this one - saves me the job of removing it! haha
I'd need to assess space myself! that's partly my reason for a wee clear out! haha, would you like me to do a measure? i'll be at the unit tomorrow night so can measure it all up if you required, had planned on keeping the box as a spare but I've got another 2 from 1.7's that "would do if required" as spares for myself so you'd be more than welcome to this one - saves me the job of removing it! haha
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
-
- Can tell where the 480 was built
- Posts: 313
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
Re: B20F Engine (+ poss engine loom and ECU)
Alan,
I forgot to mention, I have a lad needing an ECU urgently, do you need the one I have listed here? if no then we could maybe do same price as above but rather than the ECU you get the box! your call happy to discuss
I forgot to mention, I have a lad needing an ECU urgently, do you need the one I have listed here? if no then we could maybe do same price as above but rather than the ECU you get the box! your call happy to discuss
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
Re: B20F Engine (+ poss engine loom and ECU)
Fraser
yep I saw the 'need for ECU' post,
if you measure the rough length then seems fair enough, just don't tell the other half!
I can measure space I have/had as there is a trolley jack and spare gearbox (probabbly going scrap) in the place at present etc
I assume the engine 'was running' ? no funny noises from within?
yep I saw the 'need for ECU' post,
if you measure the rough length then seems fair enough, just don't tell the other half!
I can measure space I have/had as there is a trolley jack and spare gearbox (probabbly going scrap) in the place at present etc
I assume the engine 'was running' ? no funny noises from within?
Alan
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
-
- Can tell where the 480 was built
- Posts: 313
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
Re: B20F Engine (+ poss engine loom and ECU)
Hi Alan!
Turns out hes found an ecu, so all available!
Will get it measured tomorrow for you!
Turns out hes found an ecu, so all available!
Will get it measured tomorrow for you!
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium