So, today was the day...

Here you can start a thread about your 480 days. Only the starter of the thread is allowed to fill his thread, and only one thread per person. Threads are simply a personal diary.

Moderators: jifflemon, coyote1980, Rachel

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Sat Mar 25, 2017 6:08 pm

Not a lot managed this week - Did drop the some bits off for powder coating, but they've not managed to complete this week; Added to that it's the girlfriends birthday, mothers day and I've a huge presentation to practice for next week, so my time is a tad limited!

I did pop the headlamp covers off, as I know i've got a faulty adjuster. Didn't realise just HOW faulty...

Image

It's not even the right plastic piece! Easy to sort though!

And because I'm a tad obsessive, I made sure that both adjusters were wound out, greased, wound all the way back in, that back out to roughly their starting point (I'll pop to the MOT station to get them setup once it's actually on the road). Also removed the remains of the beam bender...

Image

If you've never used detailing clay, then you're missing out. I use it on the paintwork before waxing, but I save my used bits for things like glass and alloys. Its a soft clay, almost like blu-tack, that lifts of imperfections with only gentle rubbing.

Image

Finally, I did a quick oil change. Just an oil change; The stuff that's in is going to be used as a flush, then I'll do both oil and filter. I'm also checking that there's no annoying leaks. First up, the drain plug!

PTFE tape wrapped around the threads is something I was taught many moons ago

Image

And yes, I am re-using the washer, but again, it'll be replaced when I do the "proper" oil and filter change.
Last edited by jifflemon on Sun Jul 09, 2017 9:04 pm, edited 1 time in total.

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: So, today was the day...

Post by jamescarruthers » Sat Mar 25, 2017 9:34 pm

I think you are missing the little cups that the screw heads sit in to adjust the lights. Brinkie has found us BMW equivalents in this thread: http://www.volvo-480-europe.org/forum/v ... mw#p210237

Also, how are your gas struts? I foolishly forgot how many there were and ordered double so if you'd like two, they are here in Cambridge.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Sun Mar 26, 2017 12:54 am

Will take you up on that James; not because they need replacing but just because I can replace them.
The current ones have probably lasted 20+ years, so changing them now should hopefully mean it'll be someone else's problem by the time they need doing again (yes, I'm THAT old...)

Oh and Robert has already added some headlamp cups to my dashboard repair costs. :hopping:

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: So, today was the day...

Post by jamescarruthers » Sun Mar 26, 2017 6:19 am

No problem. I paid €25.89 each. You can have both for £25 if you like. Do you want them posted?
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

eye of ra
Can tell where the 480 was built
Posts: 355
Joined: Tue Dec 04, 2012 7:33 pm
Location: Derbyshire

Re: So, today was the day...

Post by eye of ra » Sun Mar 26, 2017 11:24 am

jamescarruthers wrote:I think you are missing the little cups that the screw heads sit in to adjust the lights. Brinkie has found us BMW equivalents in this thread: http://www.volvo-480-europe.org/forum/v ... mw#p210237

Also, how are your gas struts? I foolishly forgot how many there were and ordered double so if you'd like two, they are here in Cambridge.
They are currently showing no stock till May but have found this

http://www.ebay.co.uk/itm/BMW-E23-E24-E ... SwImRYmag4
Current:
480 ES Auto 1989
480 Celebration 187
480 ES Auto 1991
CLK430 Conv 2001
Hyundai i10 2015

eye of ra
Can tell where the 480 was built
Posts: 355
Joined: Tue Dec 04, 2012 7:33 pm
Location: Derbyshire

Re: So, today was the day...

Post by eye of ra » Wed Mar 29, 2017 5:08 pm

eye of ra wrote:
jamescarruthers wrote:I think you are missing the little cups that the screw heads sit in to adjust the lights. Brinkie has found us BMW equivalents in this thread: http://www.volvo-480-europe.org/forum/v ... mw#p210237

Also, how are your gas struts? I foolishly forgot how many there were and ordered double so if you'd like two, they are here in Cambridge.
They are currently showing no stock till May but have found this

http://www.ebay.co.uk/itm/BMW-E23-E24-E ... SwImRYmag4
I have just had 6 arrive and can confirm they fit.
Current:
480 ES Auto 1989
480 Celebration 187
480 ES Auto 1991
CLK430 Conv 2001
Hyundai i10 2015

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Wed Mar 29, 2017 5:29 pm

great news! I've added them to list of Skandix parts that no longer need sourcing!

My Gas struts arrived from James today too; Think they may be able to be sourced cheaper than Skandix Prices too!

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: So, today was the day...

Post by jamescarruthers » Wed Mar 29, 2017 8:53 pm

You can theoretically get the originals recharged
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Thu Apr 06, 2017 5:06 pm

Quick update - The bits are back from the powder coaters! Had a nice chat with them and it turns out they do a LOT of work for a well known Newport Pagnell based company, who's cars are VERY well known....

Anyhoo, they decided that rather than just powdercoat the bumper bar, they'd Zinc plate it first, THEN powdercoat it, to give it the absolute best chance of survival.

On with the pics I hear you cry!

Image

Image

Image

Just to improve it's chances even further, Bilt Hamber S50 cavity wax is going into the seams and box sections - Thank heavens for the access holes half way as even the standard quite lengthy extension won't go halfway!

Image

You can just about make out the s50 dripping out... but trust me, there's about half a can in there at the moment! And tomorrow, after round one has dried, the other half is going in!

Image

Image
Last edited by jifflemon on Sun Jul 09, 2017 9:07 pm, edited 1 time in total.

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Tue Apr 11, 2017 9:07 pm

So, the dashboard has arrived back from its holiday in the Netherlands! Here it is on the test bench:

Image

And here it is, after being delivered by the wonderfully caring delivery firm Yodel. :angry:

Image

This is no reflection on the packaging; It was bubble wrapped and foam packed, I figure Yodel have used it as a football or something similar. Thankfully a replacement cover is on its way to me.

So,I built the bumper back up and threw that back on.

Image

And after replacing the aforementioned plastic headlamp cups, this happened....

Image

Much on and offing of the lights did follow, but the OS motor had popped up for it's last time. After much prodding and testing of wiring, it was time to whip it out..

Image

however, I managed to drop one of the spacers in here...

Image

a completed sealed box section with limited access. That's going to be *fun* to fish out. :wall:
Last edited by jifflemon on Sun Jul 09, 2017 9:12 pm, edited 1 time in total.

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: So, today was the day...

Post by jamescarruthers » Tue Apr 11, 2017 9:45 pm

I can't even describe how much I hate Yodel. I think they have the contract with NL Post system. So our Dutch friends pay for decent track/trace system and get chimps on our end. When I got my new front clusters, they just dumped them outside my door in the rain.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

User avatar
brinkie
480 Connoisseur
Posts: 857
Joined: Mon Apr 21, 2014 11:20 am
Location: The Netherlands
Contact:

Re: So, today was the day...

Post by brinkie » Wed Apr 12, 2017 6:40 am

Yep, PostNL hands the package over to Yodel which operate so cheap that they must drop all quality requirements and took that literally. :angry:
I could try DHL next time, but chances are you will end up with another cheap courier. And I will add another layer of bubble wrap...
Robert.

Present cars: 1994 Volvo 480 GT 2.0i, 1999 Volvo S70 2.5 Europa, 2010 Volvo V70 2.0F Momentum

User avatar
dcwalker
480 Is my middle name
Posts: 1522
Joined: Sun Sep 16, 2012 12:30 pm
Location: York

Re: So, today was the day...

Post by dcwalker » Wed Apr 12, 2017 8:45 am

Bad luck with the instrument panel - so many couriers just couldn't care less.

Overall, though, the car is coming on in leaps and bounds - and I am very jealous of your rear bumper beam!!

Look forward to seeing the car for real in May...?

David
Current: 1994 480 GT, 1996 460 CD & 1997 440 LE with lots of optional extras & 2007 V50 SE Sport
Previous: Celebration 331 (re-homed with Richard S), Celebration 467 (returned to Martin Mc); Celebration 346 (re-homed with Alan480); Celebration 269 (scrapped abandoned project), Celebration 73 (sold on after 6 years), 1992 ES, 1988 ES - and numerous other non-480 Volvos!

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Wed Apr 12, 2017 1:42 pm

Yup, hoping to be there in may! Don't get too excited, it's a mess on the outisde!

User avatar
dcwalker
480 Is my middle name
Posts: 1522
Joined: Sun Sep 16, 2012 12:30 pm
Location: York

Re: So, today was the day...

Post by dcwalker » Wed Apr 12, 2017 3:41 pm

Fear not - I shall manage my expectations... ;)

David
Current: 1994 480 GT, 1996 460 CD & 1997 440 LE with lots of optional extras & 2007 V50 SE Sport
Previous: Celebration 331 (re-homed with Richard S), Celebration 467 (returned to Martin Mc); Celebration 346 (re-homed with Alan480); Celebration 269 (scrapped abandoned project), Celebration 73 (sold on after 6 years), 1992 ES, 1988 ES - and numerous other non-480 Volvos!

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Sun Apr 23, 2017 7:52 pm

So.... I fell it's time for an update!

Firstly, the headlamp. Swapped over the new motor.

For around 5 minutes I had fun with one motor going up whilst the other when down, but a quick adjustment on spindle saw them both popping up together. There's something quite magical about pop up headlamps...

Next up, was a bit of a mini service - Nothing too exciting, had done the oil previously, so fuel filter, wipers, distributor cap, plugs and plug leads. Rotor arm will have to be another day as I've been supplied the wrong one. Oddly, the NGK plugs seemed ever so slightly longer than the bosch ones that came out.

Image

Then next up was swapping the dashboard cover over and screwing the dashboard back in place. This time it survived the courier trip!

Image

I then went round all the brakes, removing the calipers, applying fresh red rubber grease to the caliper guides and copper slipping the pads. The discs look buggered, so I'll have to add them to the shopping list too.

Hopefully the weather will stay fine and I can get a few miles under its tyres...
Last edited by jifflemon on Sun Jul 09, 2017 9:14 pm, edited 1 time in total.

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Mon May 01, 2017 5:01 pm

Managed to spend a few hours removing the worst of the Buytl tape/No more nails/Bathroom sealant from the sides of the car, here's how we're looking for the moment.

Image

Image

the white patches you see now are where it's pulled off the paint! I'm not worrying too much as the paint itself isn't worth saving :crazy:
Last edited by jifflemon on Sun Jul 09, 2017 9:16 pm, edited 1 time in total.

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Wed May 10, 2017 8:54 pm

Another little teaser for you all....

On the left, a 480 window winder switch; the right is a 440 window switch

Image

Any ideas why I'm looking to swap them? :?:

How about if we open them both up?

Image

More to come.....
Last edited by jifflemon on Sun Jul 09, 2017 9:17 pm, edited 1 time in total.

User avatar
dcwalker
480 Is my middle name
Posts: 1522
Joined: Sun Sep 16, 2012 12:30 pm
Location: York

Re: So, today was the day...

Post by dcwalker » Wed May 10, 2017 9:14 pm

You should have looked more closely when you were looking in mine - or perhaps you did! :D

Provided you adapt the 440 switch exactly to match the 480 one, add the extra pin in that the 480 does not have (although it appears yours does!) and cut the cross connection that does not exist on the 480 (leaving the LED connection in place, of course, which matches that on the 480) you can have illuminated switches without losing any functionality (including one-shot and closing all windows on holding the key).

Have fun!

David
Current: 1994 480 GT, 1996 460 CD & 1997 440 LE with lots of optional extras & 2007 V50 SE Sport
Previous: Celebration 331 (re-homed with Richard S), Celebration 467 (returned to Martin Mc); Celebration 346 (re-homed with Alan480); Celebration 269 (scrapped abandoned project), Celebration 73 (sold on after 6 years), 1992 ES, 1988 ES - and numerous other non-480 Volvos!

jifflemon
480 Is my middle name
Posts: 2464
Joined: Sat Dec 17, 2016 11:03 am

Re: So, today was the day...

Post by jifflemon » Fri May 12, 2017 5:01 pm

Things you'll never hear an Auto-electrician say

"You've got too many earthing points"

:hopping:

Earthing points are a bit like spare cash; You can never have too many! Car electrics are relatively simple things - Give something a feed, give it an earth an boom, you've got a circuit. However, as things moved from simple circuits to more complicated ones, we've had "learning experiences" along the way; If you've a relatively newish car, you'd be amazed by the number of earths you've got. And for anyone of a "certain" age, I'm sure you know someone who owned a mini that shorted it's throttle cable out because the engine body earth strap snapped (after the top steady bar had usually worn away/snapped off).

So, to that end, I decided to add a few more earthing points. 480's main earthing points go from a big flat copper car from the battery to the inner wing, then down to the gearbox. It was probably adequate when the car was new, but 25 years on... well...

So first up, Alternator to engine. There's an earth post on the alternator, so I ran a nice 30amp piece of cable to the block.

Image

Then I ran another 30 amp cable from the existing earth point on the engine hook, to the bracket on the inner wing.

Image

Then for good measure, I ran a big chunky earth from one the bottom gearbox mounts to the front cross member

Image

And finally, from the battery earth, directly to the gearbox

Image

Ignore the dubious battery terminals, they'll be being replaced soon too! (along with re-terminating the cables at the battery ends).

So, with all the additional earthing, what are you going to notice? Well, probably nothing. But what's going to give me is one less thing to worry about. I can be confident that I've got sufficient earth paths for now (although I'll be putting an additional Battery to body one on when I'm doing the batter terminals!).

I've also got these to play with.

Image

The right one is a classically unobtainum 480 top window seal. The left one is a second hand S40 one, which can, apparently, be trimmed to fit. Shall report in on how that goes, and if it's good, will keep fingers crossed that these are still available new from volvo so I can repeat the process on them.
Last edited by jifflemon on Sun Jul 09, 2017 9:20 pm, edited 1 time in total.

Post Reply