Hello
Moderators: jifflemon, coyote1980, Rachel
-
- 480 Newbie
- Posts: 4
- Joined: Fri Jun 12, 2009 10:06 am
- Location: Lincoln, England
Hello
Just wanted to say hello to everyone on the forum. Been an admirer of the Volvo 480 for some time until 6 weeks ago when i finally bought one. Was sold to me with several problems including stuttering while accelerating, a popup bracket damaged and the light being kept upright by a piece of wood, drivers side wing mirror smashed off etc. So straight off I knew alot of my time would be taken by restoring this car to some sort of glory. Slowly but surely have replaced the wing mirror, headlight brackets, sorted the stuttering and going through afew other things. I have to say from all the cars i've ever owned and i've had 20 plus i've never felt the fervour I have for the others like i do the 480. Got my weekend down to cleaning the ICV, setting the headlights correct and afew other minor jobs. Loving it, I will most definitely be keeping the faith.
When theres always biscuits in the tin wheres the fun in biscuits
-
- Advanced 480 rookie
- Posts: 509
- Joined: Mon May 04, 2009 2:53 pm
.
when you do the tickover.block the iac pipe and set the throttle plate at 950 rpm.then unblock.
- B18FT - LOVER
- Knows an Aerodeck isn't a 480
- Posts: 299
- Joined: Sun Apr 26, 2009 6:56 pm
- Location: Barnstaple
Not sure what father ted is on about lol..
But hello and welcome matey, great site here so use it wisely, i have plenty of 480 spares and if they arnt gone soon it's going to the scrap yard as i need the space, engine and loom has gone but the rest remains so pm me if you need any thing bud...
B18FT - LOVER......... aka Rob...
But hello and welcome matey, great site here so use it wisely, i have plenty of 480 spares and if they arnt gone soon it's going to the scrap yard as i need the space, engine and loom has gone but the rest remains so pm me if you need any thing bud...
B18FT - LOVER......... aka Rob...
-
- Started learning about 480
- Posts: 67
- Joined: Wed Mar 11, 2009 6:00 pm
- Location: Livingston
-
- Advanced 480 rookie
- Posts: 509
- Joined: Mon May 04, 2009 2:53 pm
.
they can idle really lumpy if the throttle plate is set wrong.people always think its the iac cleaning.on basic idle the stab valve should be closed.
-
- 480 Newbie
- Posts: 4
- Joined: Fri Jun 12, 2009 10:06 am
- Location: Lincoln, England
Just a quick update on my weekend work a while back, cleaning the ICV has worked a treat. Took afew wash a go's as per the superb instructions on this site and it has ticked over 100% better since. Still not got the headlights quite right but as good as they are going to get for the time being.
When theres always biscuits in the tin wheres the fun in biscuits