how to remove ?
Moderators: jifflemon, coyote1980, Rachel
how to remove ?
how do you remove the plastics around the gearstick , and the vem/volt/1din plastic rack
i have stripped the instrument panel as much as ive figured out ,
and in doing so noticed that some previus owner has been working with wood,
fine powdered sawdust everywhere and specialy from the vents
would like to get a hold of the plastics so that they can be washed and the vents to be cleaned and if possible the fan unit.
what do i remove and how to reach these parts ?
H.
i have stripped the instrument panel as much as ive figured out ,
and in doing so noticed that some previus owner has been working with wood,
fine powdered sawdust everywhere and specialy from the vents
would like to get a hold of the plastics so that they can be washed and the vents to be cleaned and if possible the fan unit.
what do i remove and how to reach these parts ?
H.
i mean do i have to remove the whole dash inorder to get to the fan and to remove the 1 din / vem / volt gauge plastic rack , and if how do i remove ?
on top arrow is the din rack and the middle arrow is where the sawdust is
and the lowers is the gear cover ,
dust like that on both sides , i asume its saw dust but who knowes what it is , hehe
H.
on top arrow is the din rack and the middle arrow is where the sawdust is
and the lowers is the gear cover ,
dust like that on both sides , i asume its saw dust but who knowes what it is , hehe
H.
- B18FT - LOVER
- Knows an Aerodeck isn't a 480
- Posts: 299
- Joined: Sun Apr 26, 2009 6:56 pm
- Location: Barnstaple
where are the bolt/screws for the dash found , i located some in the center below the rack , are there others on the sides ?
and where are the screws for the shift stick cover ?
to be honest i have no idea what that gunk is , it looks like very fine powdered saw dust ,like somethings been sanded , it can very well be rust ,
oh well ,. hehe
H.
and where are the screws for the shift stick cover ?
to be honest i have no idea what that gunk is , it looks like very fine powdered saw dust ,like somethings been sanded , it can very well be rust ,
oh well ,. hehe
H.
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
Put a screwdriver up between the trim and the lagre cubby in the centre console and push the 4 retaining lugs inwards the large cbby will now come out as will the swtches above it. The small cubby below it can be removed but it has only 2 lugs .
Remove the ashtray and there is a screw underneath it and if your look upwards after the cubbies and switch has been removed you should see the retaining screw there.
Remove the ashtray and there is a screw underneath it and if your look upwards after the cubbies and switch has been removed you should see the retaining screw there.
-
- Advanced 480 rookie
- Posts: 509
- Joined: Mon May 04, 2009 2:53 pm
.
looks like a nice car.
Last edited by ted clutch on Sat Jun 13, 2009 11:17 am, edited 1 time in total.
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
fantastic
the boot pice i mean is the other the LARGE one that is around that one ,
everything else is right spot on
, you wouldent happen to have a uk passangers side back rest seat cussion lying around with this fabric ?
I just need the backrest cussion ,
i though it might be wiser to find an uk side passangers seat then a driverside over here since the driverside is usualy the one thats most torn,
mines been used as birds nest material , very nice picking holes
there was a couple of more bits i needed , but i m still waiting for callback from the scarpper if the seatbelts are the right ones or not ,
H.
the boot pice i mean is the other the LARGE one that is around that one ,
everything else is right spot on
, you wouldent happen to have a uk passangers side back rest seat cussion lying around with this fabric ?
I just need the backrest cussion ,
i though it might be wiser to find an uk side passangers seat then a driverside over here since the driverside is usualy the one thats most torn,
mines been used as birds nest material , very nice picking holes
there was a couple of more bits i needed , but i m still waiting for callback from the scarpper if the seatbelts are the right ones or not ,
H.
- B18FT - LOVER
- Knows an Aerodeck isn't a 480
- Posts: 299
- Joined: Sun Apr 26, 2009 6:56 pm
- Location: Barnstaple
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
Damned shoe fashionistas
These are an old old pair of el cheapo indestructible trainers with welded up knots on the scruffy laces so I just slip them on and off and can scuff the ar** off of them without caring
However for only £100 inc postage these wonderful shoes can be all yours and just think of it you can send one each to two people you dont like or for an incredible bargain buy one at £110 and get the other one completely free
(they say the grunge look is making a come back now! )
Just be glad I am not a naturist !
These are an old old pair of el cheapo indestructible trainers with welded up knots on the scruffy laces so I just slip them on and off and can scuff the ar** off of them without caring
However for only £100 inc postage these wonderful shoes can be all yours and just think of it you can send one each to two people you dont like or for an incredible bargain buy one at £110 and get the other one completely free
(they say the grunge look is making a come back now! )
Just be glad I am not a naturist !
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
Zerbot must have gone up country
you have a pm
thought in a spare moment I would look uo what zerbot meant in finnish and came across this idiomatic expression
Kolmannen asteen turbomuna Turbodick of a third degree
superb
its just such an expressive language
havent stopped smiling since
dont you just love the online translators they never get i quite right but you know what they mean
you have a pm
thought in a spare moment I would look uo what zerbot meant in finnish and came across this idiomatic expression
Kolmannen asteen turbomuna Turbodick of a third degree
superb
its just such an expressive language
havent stopped smiling since
dont you just love the online translators they never get i quite right but you know what they mean
Well those online translators work really bad with finnish. You should see some user manuals that are translated with those
But what in earth have you tried to translate on the first place?
But what in earth have you tried to translate on the first place?
[url=http://picasaweb.google.co.uk/ahti.peura/Volvo480ES1987RestorationProject#][img]http://www.ihku.org/~dakyy/signature.jpg[/img][/url]
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
Dakky
it came from this website that I found one day when browsing the internet looking for linguistic web sites. Its absolutely hilarious if somewhat crude
have pm 'ed you the web address
ignore the eye candy at the side.
Still finnish is a linguistic outlier just the same as basque and hungarian ! Isnt language fascinating:D
Had an argumnt he other day about scandinavians , finns are not scandinavian but a uniquely distinctive grouping.
it came from this website that I found one day when browsing the internet looking for linguistic web sites. Its absolutely hilarious if somewhat crude
have pm 'ed you the web address
ignore the eye candy at the side.
Still finnish is a linguistic outlier just the same as basque and hungarian ! Isnt language fascinating:D
Had an argumnt he other day about scandinavians , finns are not scandinavian but a uniquely distinctive grouping.