1989 ES 1.7 BREAKING FOR PARTS

Cleaned up the garage and found some parts you want to sell? Or are you looking for that one part? You can advertise or request just about anything that has to do with the Volvo 480 in here: brochures, towing-hooks, antenna's, etc etc...

Moderators: jifflemon, coyote1980, Rachel

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sat Dec 05, 2020 7:28 pm

I've started a new thread to hopefully entice anyone in need for parts... My project has fallen to an inevitable end, this 480 is just too far gone to justify the work so I am trying to shed as much of her good bits before she becomes a cube. Please see the link for some basic images of the rust bucket. I'm not going to be stripping this in one go, but will take parts off as/when they are requested.

https://drive.google.com/drive/folders/ ... sp=sharing

Not looking to make a fortune, I'd just like to try and make other 480s with more hope shine that little bit brighter! Plus, if I could make close to what I paid for her it would mean it wasn't a total bust!

I can provide pictures of any parts you might need, just hit me up with a message or reply to this thread. I cannot comment on the condition of many mechanical parts as I never got her running, and the electrics have also been a mare. I will however try to test any electrical components you may need with my probe/battery.

Cheers
Alf
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sat Dec 05, 2020 7:28 pm

FYI the mudflaps and auxiliary dials have been spoken for!
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

User avatar
MisterH
480 Is my middle name
Posts: 1161
Joined: Sat Nov 24, 2018 6:15 pm
Location: Stockbridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by MisterH » Sat Dec 05, 2020 8:26 pm

How is the Drivers side rear lense looking? I need an uncracked replacement (not necessarily pristine, just one that can be restored)

I am sorry to hear there is no other reasonable option than throw in the towel, but there are a couple good looking ones at the sanctuary waiting for an adopter
Current Jobs to do (23/1/22):
Fix Central Locking
Fix drivers side speaker
Annoying Scratching Squeak
Water leaks
Complete Front O/S rebuild

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sun Dec 06, 2020 12:18 pm

MisterH wrote:
Sat Dec 05, 2020 8:26 pm
How is the Drivers side rear lense looking? I need an uncracked replacement (not necessarily pristine, just one that can be restored)
Did you mean the rear brake light lense/unit (excuse my limited car linguo) - if so yes unfortunately they are both cracked. I will send some pictures so you can judge the extent of the wear...
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

User avatar
MisterH
480 Is my middle name
Posts: 1161
Joined: Sat Nov 24, 2018 6:15 pm
Location: Stockbridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by MisterH » Sun Dec 06, 2020 12:49 pm

alfie12 wrote:
Sun Dec 06, 2020 12:18 pm
MisterH wrote:
Sat Dec 05, 2020 8:26 pm
How is the Drivers side rear lense looking? I need an uncracked replacement (not necessarily pristine, just one that can be restored)
Did you mean the rear brake light lense/unit (excuse my limited car linguo) - if so yes unfortunately they are both cracked. I will send some pictures so you can judge the extent of the wear...
Hi Alfie

yes that is what I meant, that's ok it's not urgent so I will keep an eye out. It's just if they aren't cracked they can be sanded and relaquered. My offside one is good, but the drivers side is cracked
Current Jobs to do (23/1/22):
Fix Central Locking
Fix drivers side speaker
Annoying Scratching Squeak
Water leaks
Complete Front O/S rebuild

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sun Dec 06, 2020 5:37 pm

[/quote]

Hi Alfie

yes that is what I meant, that's ok it's not urgent so I will keep an eye out. It's just if they aren't cracked they can be sanded and relaquered. My offside one is good, but the drivers side is cracked
[/quote]

They are likely too far gone for your restoration but here they are anyway (NS pictured too for anyone else who may be interested)

https://drive.google.com/drive/folders/ ... sp=sharing
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sun Dec 06, 2020 6:33 pm

I also have a brand new windscreen, unused, gathering dust in my room, with the rearview mirror bracket fitted. I was clearly jumping the gun getting this!
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

Norm57
Can tell where the 480 was built
Posts: 362
Joined: Wed Sep 30, 2015 5:08 pm
Location: Knaresborough

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by Norm57 » Sun Dec 06, 2020 6:46 pm

alfie12 wrote:
Sun Dec 06, 2020 6:33 pm
I also have a brand new windscreen, unused, gathering dust in my room, with the rearview mirror bracket fitted. I was clearly jumping the gun getting this!
What sort of price are you looking for . I would be interested in the screen,mine has a stone chip and wiper marks that will not come off.

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sun Dec 06, 2020 7:00 pm

Norm57 wrote:
Sun Dec 06, 2020 6:46 pm
alfie12 wrote:
Sun Dec 06, 2020 6:33 pm
I also have a brand new windscreen, unused, gathering dust in my room, with the rearview mirror bracket fitted. I was clearly jumping the gun getting this!
What sort of price are you looking for . I would be interested in the screen,mine has a stone chip and wiper marks that will not come off.
For context, I paid £150 for it from a auto glass distributor. So I guess close to that would be ideal, keeping in three figures. I also don't think I trust any courier with shipping (it wasn't boxed or wrapped when I picked it up, just styrofoam corners) so would be best collected around Manchester.
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

Norm57
Can tell where the 480 was built
Posts: 362
Joined: Wed Sep 30, 2015 5:08 pm
Location: Knaresborough

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by Norm57 » Sun Dec 06, 2020 7:22 pm

alfie12 wrote:
Sun Dec 06, 2020 7:00 pm
Norm57 wrote:
Sun Dec 06, 2020 6:46 pm
alfie12 wrote:
Sun Dec 06, 2020 6:33 pm
I also have a brand new windscreen, unused, gathering dust in my room, with the rearview mirror bracket fitted. I was clearly jumping the gun getting this!
What sort of price are you looking for . I would be interested in the screen,mine has a stone chip and wiper marks that will not come off.
For context, I paid £150 for it from a auto glass distributor. So I guess close to that would be ideal, keeping in three figures. I also don't think I trust any courier with shipping (it wasn't boxed or wrapped when I picked it up, just styrofoam corners) so would be best collected around Manchester.
Will PM you

fireblade
480 Newbie
Posts: 9
Joined: Mon Oct 14, 2019 9:10 am

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by fireblade » Mon Dec 07, 2020 5:27 pm

Hi!

Do you have the radio electric antenna?

Thanks

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Mon Dec 07, 2020 10:39 pm

fireblade wrote:
Mon Dec 07, 2020 5:27 pm
Hi!

Do you have the radio electric antenna?

Thanks
The antenna may already be spoken for. I will have to get the thing off and fully inspect as I don't know the full condition of it yet! As with most of the car, things seem to look OK on the surface until you look underneath...
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sat Dec 12, 2020 4:35 pm

Can anyone offer any suggestions with the following parts which I cannot seem to remove:

- NSF pop up light is stuck closed. The manual cog does not turn either way. Need to get it out!
- Aerial not budging. The nut on the exterior seems to move the whole aerial and worried if i twist too much it'll break!
- can't seem to find the holes for the radio tool. Does the plastic surround just pull off? Worried about breaking it!

Thanks,
Alf
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by jamescarruthers » Sat Dec 12, 2020 5:10 pm

alfie12 wrote:
Sat Dec 12, 2020 4:35 pm
- NSF pop up light is stuck closed. The manual cog does not turn either way. Need to get it out!
Sounds siezed if you can't get the cog moving so likely nobody would want it as a spare.
Have you got the nose cone off? This might help access to remove the pod with a seized motor but I'm just guessing.
alfie12 wrote:
Sat Dec 12, 2020 4:35 pm
- Aerial not budging. The nut on the exterior seems to move the whole aerial and worried if i twist too much it'll break!
Electric aeriel body in car should be held with a bracket. If bracket is missing, hold body with your hand. If tube is rotating from body you could attempt to brace this with some plyers but again it all sounds seized up and nobody would want this. Can you apply power to see if the aerial actually works before wasting more of your time. Test INSTALLED to prevent aerial mast coming out and not wanting to go back in!
alfie12 wrote:
Sat Dec 12, 2020 4:35 pm
- can't seem to find the holes for the radio tool. Does the plastic surround just pull off? Worried about breaking it!
Which radio do you have? Some early ones don't require a tool and instead have little tabs which you push in to release and then pull out
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

alfie12
480 Newbie
Posts: 42
Joined: Fri Nov 13, 2020 8:13 am
Location: Manchester

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by alfie12 » Sat Dec 12, 2020 6:56 pm

jamescarruthers wrote:
Sat Dec 12, 2020 5:10 pm
alfie12 wrote:
Sat Dec 12, 2020 4:35 pm
- NSF pop up light is stuck closed. The manual cog does not turn either way. Need to get it out!
Sounds siezed if you can't get the cog moving so likely nobody would want it as a spare.
Have you got the nose cone off? This might help access to remove the pod with a seized motor but I'm just guessing.
alfie12 wrote:
Sat Dec 12, 2020 4:35 pm
- Aerial not budging. The nut on the exterior seems to move the whole aerial and worried if i twist too much it'll break!
Electric aeriel body in car should be held with a bracket. If bracket is missing, hold body with your hand. If tube is rotating from body you could attempt to brace this with some plyers but again it all sounds seized up and nobody would want this. Can you apply power to see if the aerial actually works before wasting more of your time. Test INSTALLED to prevent aerial mast coming out and not wanting to go back in!
alfie12 wrote:
Sat Dec 12, 2020 4:35 pm
- can't seem to find the holes for the radio tool. Does the plastic surround just pull off? Worried about breaking it!
Which radio do you have? Some early ones don't require a tool and instead have little tabs which you push in to release and then pull out
Cheers James!

No cone off yet as the DSL screws have to be removed, and I can only get at these with the pop up light at least half way up! I might have to get creative with this one...

Good shout about testing the aerial. I'd be shocked if it actually works.

Think I must have an early radio. There is a tab on one side but I can only guess the metal behind it has rusted! Will have another bash.

Thanks, Alf
Alfie

I've got 9,999 problems, and no. 480 is my car :nuts:
1989 1.7 ES 110k miles - first time restoration attempt!

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by jamescarruthers » Sat Dec 12, 2020 9:11 pm

If it is a CR-4025, you might find that it is in demand, the later stuff not so much
Image

I don't think any plastic prises off on any of the radios so don't get too rough. Lots have the tabs.
Can you see this page? http://www.volvo-480-europe.org/volvo480/radios.php

If it is the CR-4025, you need to push the tabs with a flat blade screwdriver or equivalent IN to the radio for them to release. You wont get this done with your hands very easily. Then pull the tabs out after release.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

User avatar
dcwalker
480 Is my middle name
Posts: 1522
Joined: Sun Sep 16, 2012 12:30 pm
Location: York

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by dcwalker » Sat Dec 12, 2020 9:23 pm

Alfie, looking at the radio on your photo I can't see any way of releasing it. So maybe it's not locked in in that way.

If you prise out the auxiliary gauges, can you then reach in and literally push the radio from behind?

David
Current: 1994 480 GT, 1996 460 CD & 1997 440 LE with lots of optional extras & 2007 V50 SE Sport
Previous: Celebration 331 (re-homed with Richard S), Celebration 467 (returned to Martin Mc); Celebration 346 (re-homed with Alan480); Celebration 269 (scrapped abandoned project), Celebration 73 (sold on after 6 years), 1992 ES, 1988 ES - and numerous other non-480 Volvos!

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by jamescarruthers » Sat Dec 12, 2020 9:32 pm

Oops, I missed that photo! I vaguelly remember having that one in a 480. You know what, you might be right and the little outer side trims may well need to be removed and then you are left with two holes top and bottom!
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

User avatar
MisterH
480 Is my middle name
Posts: 1161
Joined: Sat Nov 24, 2018 6:15 pm
Location: Stockbridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by MisterH » Sat Dec 12, 2020 9:32 pm

jamescarruthers wrote:
Sat Dec 12, 2020 9:11 pm
If it is a CR-4025, you might find that it is in demand, the later stuff not so much
Image

I don't think any plastic prises off on any of the radios so don't get too rough. Lots have the tabs.
Can you see this page? http://www.volvo-480-europe.org/volvo480/radios.php

If it is the CR-4025, you need to push the tabs with a flat blade screwdriver or equivalent IN to the radio for them to release. You wont get this done with your hands very easily. Then pull the tabs out after release.
That looks really nice, digital screen and tuning knob perfect combination :eek:
Current Jobs to do (23/1/22):
Fix Central Locking
Fix drivers side speaker
Annoying Scratching Squeak
Water leaks
Complete Front O/S rebuild

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: 1989 ES 1.7 BREAKING FOR PARTS

Post by jamescarruthers » Sat Dec 12, 2020 9:35 pm

Its lovely, but only really sounds acceptable when paired with an amplifier, which isn't too hard if you can find one with the right plugs. It wouldn't be the end of the world to wire any old amp up to a custom plug.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

Post Reply