Volvo 480 Club Europe

Can anyone help I am after cambelt cover front and back there are three parts to cover front cover 3343732,cover upper 3344548, casing lower 3343735 casing lower is the main one I need but all would be helpful.Any info would be great.
cheers john.

Hi
Lucky you , I have some covers . Must check .
regards
Marek

In my treasures I found two covers , one plastic with Renault part number / 77....../ and second short / metal / without part number . Vadis says that You have B18E , ED , ES , EP , am I right ? You need inner and outer casings . Best for me , send VIN please . I`m charging my camera , so maybe today You will have pictures .
best
Marek

covers : outer / plastic / 7700857429 , inner / plastic / 7700741120 , inner / metal / 7700598397 .Motor B18EP 115 , C030103 .



I need a cog wheel puller / small / , / ordered / must wait 2 or 3 days .

You could use 5mm bolts, drilled through a flat plate to draw the pulley off.

It works but only on a bigger cog , for smaller you need a puller .

Hi thanks very much for replying to my post I am pleased to say I now have the covers I need.
Cheers
John.

someone was before me , no gasket , a lot of silicon , not resistant of diesel fuel and oil !

Covers ! Unfortunately , small plastic cover is cracked , it`s a gift for you . Puller I ordered for a small cog is not suitable , but ... two bolts maybe works , Vadis says..... PULLER !They give only a part number , without a picture .

Still no gasket , and a butcher was there




Crankshaft seal 50 x 68 x 8
Gear seal 30 x 40 x 7

simmering made some grooves