Page 1 of 1

Wanted PAS hoses Aircon model

Posted: Sat May 18, 2019 11:27 pm
by arthuy
I am looking for a set of usable PAS hoses for a 2.0litre manual car with Air con.

Had a set made up but couldnt get one to seal well, very frustrating.

Any leads on a source of original ones used or other wise would be great.

Thanks

Re: Wanted PAS hoses Aircon model

Posted: Sun May 19, 2019 8:47 am
by jamescarruthers
I wonder if Pirtek could help? Are they flexible hoses? Or ask at local farm machinery place as they may know a hose maker. Good luck!

Re: Wanted PAS hoses Aircon model

Posted: Sun May 19, 2019 12:31 pm
by arthuy
Thats the route I went down. :(

Re: Wanted PAS hoses Aircon model

Posted: Sun May 19, 2019 5:17 pm
by Alan 480
arthuy wrote:
Sun May 19, 2019 12:31 pm
Thats the route I went down. :(
which one wouldn't seal, and where?

I'm guessing at the pump end of the supply given it 'not easy to access'?

Re: Wanted PAS hoses Aircon model

Posted: Sun May 19, 2019 6:04 pm
by arthuy
Rack end, can't recall which one or both hoses.

Limited access and fluid dripping isnt great.

I did get a set from a non aircon car and the fittings were different.

Re: Wanted PAS hoses Aircon model

Posted: Mon May 20, 2019 11:48 am
by Alan 480
Oh !! :(

I managed to remove the steel fitting from the alloy of the rack, in with loctite, found that they were 'parallel' thread with a washer to seal, then the tapered seat was on the metal pipe. . .

might be an option?

Re: Wanted PAS hoses Aircon model

Posted: Sat May 25, 2019 12:14 pm
by arthuy
the guy made set if them up with dowty washers but still weeped.

A good second hand set would work. I have a non ac set which are different fittings so seems there are some variations.

I am sure if it was more accessible it would be easier