Page 1 of 1

Breaking last bits before scrapping

Posted: Sun Dec 30, 2018 4:07 pm
by Werrington1
Hi,

My 2 will be going to scrap at the end of the week so if require any bits, let me know.

I have a full set of plastic mats, front and back in good condition £40.
Good call Condition boot carpet £15

2 front wings, no rust

Various other interior bits including a full cloth interior in good condition and a patterned leather type interior from a GT.

Also, nearly a full set of engine hoses in good condition and 2 x 2l engine and gear boxes.

Cars will be scrapped next weekend so shout now if you need anything.

Cheers

Re: Breaking last bits before scrapping

Posted: Sun Dec 30, 2018 6:16 pm
by jamescarruthers
Well, I might like the front wings to use to chop bits out for rear arch repair.

I think dcwalker would like your mats if he hasn't already found some and the guy who blew his engine up hopefully takes your engine!engineering! ‎

Re: Breaking last bits before scrapping

Posted: Mon Dec 31, 2018 12:17 am
by noeljary
Hi,

Do you still have an in tank petrol pump assembly?

Best regards, Noel

Re: Breaking last bits before scrapping

Posted: Mon Dec 31, 2018 4:59 pm
by Alan 480
is there a half decent rear sub frame?

Re: Breaking last bits before scrapping

Posted: Mon Dec 31, 2018 5:00 pm
by Alan 480
Alan 480 wrote:
Mon Dec 31, 2018 4:59 pm
is there a half decent rear sub frame?
JUST the cross member, not really need the ARB /fore-n-aft/ panhard etc

Re: Breaking last bits before scrapping

Posted: Mon Dec 31, 2018 7:29 pm
by yorkievolvo
Lens covers from both DRL would be welcome.
Also, how about a R/H driving lamp - the one next to the DRL. I'll take both L/H & R/H, if you'd rather sell the pair.
And the rear fog-light could be put to good use.
Availability and price inc postage, please.
Or, I could pick up, if you're not too far from 'ull.
Mike H

Re: Breaking last bits before scrapping

Posted: Tue Jan 01, 2019 12:27 pm
by yorkievolvo
Forgot to add:
battery holding bracket. The fixed one mounted at the outboard side of the battery.
For some reason, it's missing from my car.
Mike H

Re: Breaking last bits before scrapping

Posted: Tue Jan 01, 2019 12:27 pm
by yorkievolvo
Forgot to add:
battery holding bracket. The fixed one mounted at the outboard side of the battery.
For some reason, it's missing from my car.
Mike H

Re: Breaking last bits before scrapping

Posted: Wed Jan 02, 2019 11:44 am
by timrosser
Well, I could still do with a good 2.0 engine & box, do you still have the lowish millage one? If so how much are you asking?

Tim