Subframe bushes

[jamescarruthers]

There are two types of subframe bushes, two in the front (P/N: 3467815) and two in the rear (P/N: 3485813).

The rear ones seem to be very difficult to get hold of.
The front ones are available very easily and I think that you can make them fit the rear position, although that may be only true for later cars where I think the parts catalogue has 3467815 listed as suitable for installation front and back.

However, the rear (white) ones are available here: https://www.volvo340onderdelen.nl/en/vo ... 85813.html

I used these in my 480, however, check your subframe as later cars might just use all four of the easy to find ones!

[Alan 480]

James

you need to re-read your post

which ones can you easily get . . . . ..

[jamescarruthers]

James

you need to re-read your post

which ones can you easily get . . . . ..

Edited, thanks mate!

[Alan 480]

James

you need to re-read your post

which ones can you easily get . . . . ..

Edited, thanks mate!

no problem, I have a full set here (two front & two rear), mines a 93 car (built around july/august 93 if I go by various 'checked by tags /stickers' on cable harness, bonnet moulding etc and other parts etc

length of steel tube seems to be main difference?

[jamescarruthers]

Maybe its as simple as the length of the bar, yes. I was worried that the rubber might have been a different density front to rear (hence why the rears are white) so made sure I got the white ones