1.7 N/A Flywheel Wanted

Cleaned up the garage and found some parts you want to sell? Or are you looking for that one part? You can advertise or request just about anything that has to do with the Volvo 480 in here: brochures, towing-hooks, antenna's, etc etc...

Moderators: jifflemon, coyote1980, Rachel

Post Reply
eye of ra
Can tell where the 480 was built
Posts: 355
Joined: Tue Dec 04, 2012 7:33 pm
Location: Derbyshire

1.7 N/A Flywheel Wanted

Post by eye of ra » Wed Sep 05, 2018 8:53 am

As per title really.

Having taken the starter off I have found that both the gear on the starter and the flywheel teeth are worn, explains the intermittent loud noise when trying to start the engine.

I did think of just replacing the starter as the new gear would reach further into the flywheel teeth but as the engine is out now would be the best time to replace it if I can find one.
Current:
480 ES Auto 1989
480 Celebration 187
480 ES Auto 1991
CLK430 Conv 2001
Hyundai i10 2015

classicswede
480 Newbie
Posts: 34
Joined: Wed Oct 05, 2005 7:34 pm

Re: 1.7 N/A Flywheel Wanted

Post by classicswede » Wed Oct 24, 2018 9:25 pm

Did you find one?

eye of ra
Can tell where the 480 was built
Posts: 355
Joined: Tue Dec 04, 2012 7:33 pm
Location: Derbyshire

Re: 1.7 N/A Flywheel Wanted

Post by eye of ra » Thu Oct 25, 2018 5:00 am

No I haven’t found one as yet.

My current thinking if I can’t find one before everything goes back together is take the old one to my local garage and have the ring gear rotated as the damage appears to only be on some teeth, the new starter would then use the undamaged teeth.

Apparently (good old youtube) this is normal as the engine will always stop in one of 4 positions and would explain why the noise I got when starting was intermittent.
Current:
480 ES Auto 1989
480 Celebration 187
480 ES Auto 1991
CLK430 Conv 2001
Hyundai i10 2015

Alan 480
480 Is my middle name
Posts: 1489
Joined: Sun Aug 28, 2011 9:03 am
Location: Aberdeen

Re: 1.7 N/A Flywheel Wanted

Post by Alan 480 » Thu Oct 25, 2018 11:49 am

eye of ra wrote:
Thu Oct 25, 2018 5:00 am
No I haven’t found one as yet.

My current thinking if I can’t find one before everything goes back together is take the old one to my local garage and have the ring gear rotated as the damage appears to only be on some teeth, the new starter would then use the undamaged teeth.

Apparently (good old youtube) this is normal as the engine will always stop in one of 4 positions and would explain why the noise I got when starting was intermittent.
I had same issue on the SS1, only solution was to buy a new ring gear. getting the old ring off meant 'destroying' it.
I put the flywheel in the freezer and ring gear in oven (SWAMBO was out)
Alan

480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1

User avatar
jamescarruthers
480 Is my middle name
Posts: 2501
Joined: Mon Jul 07, 2003 3:19 pm
Location: Cambridge

Re: 1.7 N/A Flywheel Wanted

Post by jamescarruthers » Thu Oct 25, 2018 1:11 pm

Alan 480 wrote:
Thu Oct 25, 2018 11:49 am
I put the flywheel in the freezer and ring gear in oven (SWAMBO was out)
Haha, brilliant, I've had a few moments like this recently! One was scrubbing the washer bottle out. Had to admit defeat on this one and get Rachel's help as her hands fit in the filler neck very nicely. ‎
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)

Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)

Post Reply