Windscreen nozzles
263761802630
Ebay spot
Moderators: jifflemon, coyote1980, Rachel
-
- Advanced 480 rookie
- Posts: 561
- Joined: Thu Apr 06, 2017 8:11 pm
Ebay spot
1993 Turbo auto called Skip for the important stuff
2011 Juke 190 for everything else
2011 Juke 190 for everything else
Re: Ebay spot
£30!!
I'll stick to my brand new alternatives thank you very much
I'll stick to my brand new alternatives thank you very much
- WRDendy
- Can tell where the 480 was built
- Posts: 325
- Joined: Wed Dec 30, 2009 5:33 pm
- Location: Oxford
Re: Ebay spot
Agreed. having two jets either side is quite a nice upgrade as well.
Semi related, I was driving behind a classic range rover the other day and thought the rear washer jet looked familiar:
https://www.ebay.co.uk/itm/Land-Rover-R ... Sw8gVX2sKk
Clearance over the wipers might be an issue but worth looking into if looking original is important.
Semi related, I was driving behind a classic range rover the other day and thought the rear washer jet looked familiar:
https://www.ebay.co.uk/itm/Land-Rover-R ... Sw8gVX2sKk
Clearance over the wipers might be an issue but worth looking into if looking original is important.
Formerly known as 'Jaster'
Current: '94 GT & '88 ES
Former: '89 ES
Current: '94 GT & '88 ES
Former: '89 ES
Re: Ebay spot
I covered this on my thread a while back.
The landrover items look good but need modified due to the length of the threaded part.
The landrover items look good but need modified due to the length of the threaded part.
arthuy wrote: ↑Tue Aug 01, 2017 8:01 pmdcwalker wrote:
Review of the short landrover screen washer jet. They seemed ok but are too low, when I tried to adjust the jets it either went over the roof or bottom of the screen, conclusion was that I needed a taller jet like the originals. I picked up a pair of the brass jets which are almost exactly the same size.
They were £5.99 the pair. http://www.ebay.co.uk/itm/PAIR-UNIVERSA ... 2749.l2649
The bottom clears the wipers although I had to removed the wiper linkage to get the drivers side fitted, which of course meant a sheared bolt. I managed to drill and thread it though.
They brass jets hit the middle of the screen without needing adjusted. I am glad I ordered them as the drivers side was on its last legs.