Availability of New Parts

Cleaned up the garage and found some parts you want to sell? Or are you looking for that one part? You can advertise or request just about anything that has to do with the Volvo 480 in here: brochures, towing-hooks, antenna's, etc etc...

Moderators: jifflemon, coyote1980, Rachel

User avatar
Captain Slow
480 Expert
Posts: 686
Joined: Wed Jun 06, 2007 9:13 pm
Location: St Andrews

Re: Availability of New Parts

Post by Captain Slow » Fri Apr 27, 2012 10:59 am

I can see the metal of the rear bumper being a good thing for him to reproduce. I'm sure we all have rusty ones...
Previously....
Whitney - 95 N White celebration No.449/480 now with Ladyforatey
Lula - 94 M Volvo 480GT Sold on...
Daphne - 95 M volvo 440si 1.8 73,000K (sold :()

Ulrika480
Knows where Volvo is from
Posts: 166
Joined: Sun Aug 07, 2011 3:07 pm

Re: Availability of New Parts

Post by Ulrika480 » Fri Apr 27, 2012 4:01 pm

harriet wrote:
contacted Joep Vrijling and they are looking to supply the following ?and? re manufacture the tail-lights and the rear steel bumper but all depends on the cooperation from Volvo-Cars and Hella. part available are prices in the same order of sequence:
Spoiler € 125.002
speed cog wheel € 16.003)
Trim Washer(set) € 24.004)
Glasses side-markers € 65.005)
Glasses direction indicator € 51.006)
Seals side-markers €23.007)
taillights € 20.008)
direction indicator € 7.009
Repair block window € 24.00
So we have to support people like Joep Vrijling if we want to keep are cars on the road :D
Apologies if I'm being a bit stupid because I have had a heavy week at work and at home (!).
> I don't understand all the descriptions and prices:-

Speed cog wheel > What is this ?
Tail-lights > Seals ?
Repair block window > What is this ?

Thanks

JohnB
Knows where Volvo is from
Posts: 129
Joined: Thu Nov 18, 2010 2:24 pm

Re: Availability of New Parts

Post by JohnB » Fri Apr 27, 2012 6:28 pm

Hi cut and pasted from the email he sent me but his list is in the for sale post

Repair block window is the plastic part in the window motor that often breaks, you can use it if the steel wire is still ok
(with Dutch manual and 3 screws)

Speed cog wheel is apparently a cog that wears in the speedo

Tail-lights > Seals ? is what it is replacement remanufactured seals like the ones originally fitted when new to the rear lights
I have just received these and they look the business

V480TI
480 Expert
Posts: 668
Joined: Sun Dec 08, 2002 7:13 pm
Location: Helmond, birthplace of the 480

Re: Availability of New Parts

Post by V480TI » Sun Apr 29, 2012 8:11 pm

glasgowjim wrote:A 125 euros for a spoiler + postage too pricey for me :shock: . Still Dutch prices are always higher than ours.
Hi Jim, I know what you mean, but please bear in mind that my spoilers are way tougher then original Volvo ones, fitment is perfect, quality is so much better as earlier reproductions here and on other places....
We (my dad and I) have high quality standards.
- A class materials
- perfect fitment
- good quality general
- lasting...

Seen some copy's of front spoilers and snow caps and had to laugh....

Here are some pics :

Image

Image

Image

Following piccy is an equasion between our reproduction and a set of someone that is hiding in a cave somewhere...

Image

I also have repro cog wheels and a solution for the broken plastic of the window motors.... and as you might have read, working on more parts....

Greetz
Flamered GT-Turbo 09-1995, Yellow Koni's, Intrax springs,Palm Beach,rear speakers,middle arm rest,Roboumod,Vega's, CT 906 radio/cd with 850 R amplifier, Pioneer speakers allround.
Hausser front and rear bumper, Black Diamond sport clutch, lightened flywheel, flowed head.Audi TT recirc.Stainless Cat replacement, K&N airfilter,Magnecor KV85,NGK colder plugs.
Soon ; Audi/VW calippers, 280mm Renault Sport brake discs and Ferodo DS2500 pads.

New project : 1987 Silver 480 with B18E engine

User avatar
AcidicDavey
Can tell where the 480 was built
Posts: 316
Joined: Sun Mar 13, 2011 6:49 pm
Location: Hereford, England

Re: Availability of New Parts

Post by AcidicDavey » Sun Apr 29, 2012 10:45 pm

I bought some seals from Joep, and the turn around was very quick indeed. Great person to deal with! If he was to reproduce some rear light clusters, he'd have a buyer right here!
Poppy sold 2 year ago, sorely missed :(
Image

Now driving my 98 V70 AWD inherited 8 years ago!

CaptainQwerty
Knows where Volvo is from
Posts: 104
Joined: Sun Sep 27, 2009 9:43 pm
Location: Cumbria, UK
Contact:

Re: Availability of New Parts

Post by CaptainQwerty » Mon Apr 30, 2012 11:49 am

I need new rear light seals as well.
.:Volvo 480 Turbo:.

User avatar
480s partner
Knows an Aerodeck isn't a 480
Posts: 236
Joined: Wed Jul 12, 2006 11:44 pm

Re: Availability of New Parts

Post by 480s partner » Mon Apr 30, 2012 2:49 pm

@V480TI : Do you have plans for a snow cap reproduction?

CaptainQwerty
Knows where Volvo is from
Posts: 104
Joined: Sun Sep 27, 2009 9:43 pm
Location: Cumbria, UK
Contact:

Re: Availability of New Parts

Post by CaptainQwerty » Mon Apr 30, 2012 4:43 pm

480s partner wrote:@V480TI : Do you have plans for a snow cap reproduction?
If so I see a few people as well as my self interested.

I am after another splitter, light seals, any clear lenses I can get and a snow cap :)
.:Volvo 480 Turbo:.

V480TI
480 Expert
Posts: 668
Joined: Sun Dec 08, 2002 7:13 pm
Location: Helmond, birthplace of the 480

Re: Availability of New Parts

Post by V480TI » Fri May 04, 2012 10:01 pm

for people whom are serously interested in parts, please mail to :

joepvrijling@tele2.nl

Greetz
Flamered GT-Turbo 09-1995, Yellow Koni's, Intrax springs,Palm Beach,rear speakers,middle arm rest,Roboumod,Vega's, CT 906 radio/cd with 850 R amplifier, Pioneer speakers allround.
Hausser front and rear bumper, Black Diamond sport clutch, lightened flywheel, flowed head.Audi TT recirc.Stainless Cat replacement, K&N airfilter,Magnecor KV85,NGK colder plugs.
Soon ; Audi/VW calippers, 280mm Renault Sport brake discs and Ferodo DS2500 pads.

New project : 1987 Silver 480 with B18E engine

V480TI
480 Expert
Posts: 668
Joined: Sun Dec 08, 2002 7:13 pm
Location: Helmond, birthplace of the 480

Re: Availability of New Parts

Post by V480TI » Sun May 06, 2012 2:18 pm

Will think of the snow cap reproductions, but that means that I have to take my original snowcap apart...
The snowcap actually consists of 2 parts, wich are put together.

Greetz
Flamered GT-Turbo 09-1995, Yellow Koni's, Intrax springs,Palm Beach,rear speakers,middle arm rest,Roboumod,Vega's, CT 906 radio/cd with 850 R amplifier, Pioneer speakers allround.
Hausser front and rear bumper, Black Diamond sport clutch, lightened flywheel, flowed head.Audi TT recirc.Stainless Cat replacement, K&N airfilter,Magnecor KV85,NGK colder plugs.
Soon ; Audi/VW calippers, 280mm Renault Sport brake discs and Ferodo DS2500 pads.

New project : 1987 Silver 480 with B18E engine

ChrisDK
Knows where Volvo is from
Posts: 161
Joined: Sat Aug 18, 2012 2:40 pm

Re: Availability of New Parts

Post by ChrisDK » Fri Aug 24, 2012 3:55 pm

Just a question. Has anny body ever seen or come across reproduction or aftermarked rear light clusters ? mayby in a tuning shop or something like that ?

Thanks :)

User avatar
glasgowjim
480 Is my middle name
Posts: 4830
Joined: Sun Oct 01, 2006 5:28 pm
Location: GLASGOW SCOTLAND

Re: Availability of New Parts

Post by glasgowjim » Fri Aug 24, 2012 5:58 pm

Chrisdk the answer is no :cry:

ChrisDK
Knows where Volvo is from
Posts: 161
Joined: Sat Aug 18, 2012 2:40 pm

Re: Availability of New Parts

Post by ChrisDK » Fri Aug 24, 2012 9:08 pm

Thanks for the reply
What a shame :cry: Maybe there is a marked for reproducing such items or maybe not, I suspect the reproduction price would be high.

Nice weekend to all :)

ChrisDK
Knows where Volvo is from
Posts: 161
Joined: Sat Aug 18, 2012 2:40 pm

Re: Availability of New Parts

Post by ChrisDK » Fri Aug 24, 2012 9:45 pm

Was just reading an old post with a likn to the dutch forum. I'm not wery good at dutch but it seems ther might be a chance that skadix.de will be reproducing rear weel arches repair panels.

Please read the post, hopefully you are better at dutch than I'm :)
http://www.volvo480forum.com/index.php/ ... 722.0.html

User avatar
Van
480 Connoisseur
Posts: 833
Joined: Sun Sep 23, 2007 8:27 am
Location: Ich bin ein Berliner!

Re: Availability of New Parts

Post by Van » Sat Aug 25, 2012 7:05 am

Chris the comments are sceptic about the company. For people who order a pair up front they are €180 a pair plus shipping. Later they would be sold for €220 to €240. Front order is without obligation though.

The guys write they are to expensive and probably won't be a perfect copy anyway. So they would have to make fit. One guy writes he had the right rear wheel arch of his '87 ES replaced with one of a 440 and that piece was only €25. It's said that you better invest your money in a good body repair shop.
He says that company is also selling rear lights for €380 each what is considered overpriced. The company apparently offers to buy your lights for €160 each.

Should you want to pre-order you have to register on the linked German forum. As said, pre-order is without obligation to actually take them once they are produced.
after over 10 years parted with the 1995 Volvo 480 ES 2.0

ChrisDK
Knows where Volvo is from
Posts: 161
Joined: Sat Aug 18, 2012 2:40 pm

Re: Availability of New Parts

Post by ChrisDK » Sun Aug 26, 2012 1:22 pm

Hi Van
Thanks for the translation :) I knew it was to good to be true :badmood: It could have been sweet for everybody who needs new whel arches.

User avatar
AcidicDavey
Can tell where the 480 was built
Posts: 316
Joined: Sun Mar 13, 2011 6:49 pm
Location: Hereford, England

Re: Availability of New Parts

Post by AcidicDavey » Tue Sep 11, 2012 8:55 pm

suddy wrote:I contated Scandcar today. I asked them about the rear lights and they've come back to me saying that they are working on a reproduction.

I also asked about indicators, and they said that they also have plans to reproduce those!

Very happy with that, hope that they make them...

Stephen
Any progress on this yet?? I'll need some new lights soon as I've removed the originals.
Poppy sold 2 year ago, sorely missed :(
Image

Now driving my 98 V70 AWD inherited 8 years ago!

Nickdog
480 Newbie
Posts: 13
Joined: Thu Aug 30, 2012 9:44 pm

Re: Availability of New Parts

Post by Nickdog » Wed Sep 12, 2012 5:01 pm

I'd like some new rears too without paying through the nose. I want some new front lenses too but not found any. Clear ones not the orange. I hope they reproduce!

User avatar
AcidicDavey
Can tell where the 480 was built
Posts: 316
Joined: Sun Mar 13, 2011 6:49 pm
Location: Hereford, England

Re: Availability of New Parts

Post by AcidicDavey » Mon Sep 17, 2012 12:15 am

AcidicDavey wrote:
suddy wrote:I contated Scandcar today. I asked them about the rear lights and they've come back to me saying that they are working on a reproduction.

I also asked about indicators, and they said that they also have plans to reproduce those!

Very happy with that, hope that they make them...

Stephen
Any progress on this yet?? I'll need some new lights soon as I've removed the originals.
I sent them an email yesterday asking if they were sorting something and all they responded with was that they are no longer available!

I hope to get the car back on the road soon but I have no rear lights, I'm not sure what I'm going to do! If I can't find any once I've sold my Golf I might just buy a different car again and hope someone make the clusters again! :cry:
Poppy sold 2 year ago, sorely missed :(
Image

Now driving my 98 V70 AWD inherited 8 years ago!

User avatar
glasgowjim
480 Is my middle name
Posts: 4830
Joined: Sun Oct 01, 2006 5:28 pm
Location: GLASGOW SCOTLAND

Re: Availability of New Parts

Post by glasgowjim » Mon Sep 17, 2012 4:23 pm

when you say no rear lights do you mean absolutely no rear light clusters ?

Post Reply