breaking LHD 2.0

Cleaned up the garage and found some parts you want to sell? Or are you looking for that one part? You can advertise or request just about anything that has to do with the Volvo 480 in here: brochures, towing-hooks, antenna's, etc etc...

Moderators: jifflemon, coyote1980, Rachel

WhiteWolf
Knows an Aerodeck isn't a 480
Posts: 273
Joined: Sat Dec 20, 2014 1:50 pm

Re: breaking LHD 2.0

Post by WhiteWolf » Mon Jul 30, 2018 5:48 pm

Is the car black, how is the nosecone I might need one...
Cheers..
93 480 Turbo white
with Roboumod
91 480 Turbo white
with Roboumod..
91 480 Es silver

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Tue Jul 31, 2018 2:09 pm

Storm grey but avaliable if you need one.

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Sun Oct 14, 2018 4:05 pm

Been a busy few months with work.

Hope to get the car stripped and shell removed this month.

Looking to get the glass, axle, engine/gearbox and subframe off and whatever I can manage.

Not much left and a few parts have been put aside for folk but please ask, I have no plans for the engine so happy to pass that on, runs well.

Colin

cornishgrose
480 Newbie
Posts: 4
Joined: Sat Apr 01, 2017 6:09 pm

Re: breaking LHD 2.0

Post by cornishgrose » Fri Oct 26, 2018 1:53 pm

Hi
I am looking for the rear screen washer jet and the bonnet handle if you have these?
Cheers

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Fri Oct 26, 2018 10:42 pm

used both parts for myself, assuming you mean the plastic bonnet handle?

Alan 480
480 Is my middle name
Posts: 1522
Joined: Sun Aug 28, 2011 9:03 am
Location: Aberdeen

Re: breaking LHD 2.0

Post by Alan 480 » Sat Oct 27, 2018 2:52 pm

crazy question

is the shell in fairly good condition, eg rear arches etc

if glass still in it ? could it be made mobile enough to be put onto a trailer?

wacky idea of finding a wrecked / rotten RHD and put the parts onto / into this shell?? :shock:

assuming it has had an easier life than any cars usually living north of border . . . .
Alan

480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Sun Oct 28, 2018 8:31 am

The shell is pretty good, glass still fitted.

Much better than mine, I have a plan to cut the rear panels off for my own car.

I was going to try and start cutting the shell up but if you are interested let me know. I am on holiday this week, you are welcome to come and look. Still a driving car despite parts being removed so no issue going on a trailer.

When I was removing the bumper I said to my friend how good it was and a shame to chop it.

noeljary
480 Newbie
Posts: 10
Joined: Fri Mar 06, 2015 10:16 pm

Re: breaking LHD 2.0

Post by noeljary » Sun Oct 28, 2018 10:19 pm

Hi,

Are you in a position to sell the petrol pump yet?

Many thanks, Noel

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Mon Oct 29, 2018 11:24 am

sorry, not yet .

May need to put breaking back until after christmas.

Work commitments take priority just now and need vehicle rolling/droving.

Alan 480
480 Is my middle name
Posts: 1522
Joined: Sun Aug 28, 2011 9:03 am
Location: Aberdeen

Re: breaking LHD 2.0

Post by Alan 480 » Mon Oct 29, 2018 12:39 pm

I think there could be too many 'issues' if trying to get it 'off SORN'?

also I guess the loom will be crazily different, but still maybe worth thinking about, especially if it is on 'hold' until after Christmas ? ? ?

time to work on SWAMBO :wink:
Alan

480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1

Irolllowvo
480 Newbie
Posts: 14
Joined: Tue Jul 26, 2016 9:25 am

Re: breaking LHD 2.0

Post by Irolllowvo » Mon Oct 29, 2018 8:47 pm

WhiteWolf wrote:
Mon Jul 30, 2018 5:48 pm
Is the car black, how is the nosecone I might need one...
Cheers..
I have a spare black nose cone if needed 👍🏻👍🏻
:boom:

cornishgrose
480 Newbie
Posts: 4
Joined: Sat Apr 01, 2017 6:09 pm

Re: breaking LHD 2.0

Post by cornishgrose » Tue Oct 30, 2018 3:06 pm

arthuy wrote:
Fri Oct 26, 2018 10:42 pm
used both parts for myself, assuming you mean the plastic bonnet handle?
Poo... and yes the interior bonnet handle

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Wed Oct 31, 2018 7:15 pm

When I was missing a handle, I used the lid from a shampoo bottle with some epoxy putty inside, makes it useable if that helps you.

User avatar
Murf
Friend of Club 480 Europe
Posts: 4600
Joined: Wed Mar 12, 2003 12:45 am
Location: Inverness
Contact:

Re: breaking LHD 2.0

Post by Murf » Mon Nov 12, 2018 3:11 pm

Hi, what are the front wings and doors like in terms of corrosion? If you are in Aberdeen then I could collect them...
Kia Pro'ceed GT 1.6 Turbo
1992 480 Turbo
2007 Focus ST

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Mon Nov 12, 2018 5:28 pm

wings, I have used the drivers wing. passenger got a bit misshaped from a broken door strap. could be fixed.

Was consider keeping the doors myself but if you have a need happy to sell them, they are better than mine.

I am not in Aberdeen, I am near Paisley.

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Sat Dec 29, 2018 10:39 am

An update on breaking.

I still have the shell and a lot of parts. Engine etc.

There are a few parts promised out, I have lost track of some requests as it seems people have have got rid of there cars so don't neef the parts.

Have replied to some PM's but not had replies but there seems to be alert issues.

So if you are still waiting for me to come back to you about parts let me know, I am a busy chap but do try to reply asap.

May also be able to get leather seats. the previous owner held onto them and contacted me recently to say they were available if I wanted them.

Martin Lacey
480 Newbie
Posts: 8
Joined: Thu Jun 15, 2017 5:36 pm

Re: breaking LHD 2.0

Post by Martin Lacey » Thu Mar 14, 2019 3:46 pm

Any chance of a door lock and key?

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Thu Mar 14, 2019 7:55 pm

can probably sort you out.

Drivers side?

arthuy
Advanced 480 rookie
Posts: 562
Joined: Wed Apr 20, 2016 8:02 pm

Re: breaking LHD 2.0

Post by arthuy » Sun Mar 24, 2019 5:07 pm

With the weather warming up I am going to be chopping the shell up over the next month.

Still have a lot of good parts, doors, axle, engine, glass.

If you have asked me for parts please give me a nudge to remind me.

I will only be keeping the parts I need for myself as I dont have space.

Martin Mc
480 Rookie
Posts: 457
Joined: Tue May 29, 2012 11:57 am

Re: breaking LHD 2.0

Post by Martin Mc » Fri Apr 05, 2019 6:55 pm

arthuy wrote:
Sun Mar 24, 2019 5:07 pm
With the weather warming up I am going to be chopping the shell up over the next month.

Still have a lot of good parts, doors, axle, engine, glass.

If you have asked me for parts please give me a nudge to remind me.

I will only be keeping the parts I need for myself as I dont have space.
I don't suppose you still have the driver's wing, and any door mirrors?

Looking to tart up my ride a bit before joining the convoy to the Derbyshire Dales in May :)

Martin
1991 ES White / 1995 ES Red / 1995 ES Red / 1994 S Black / 1995 Celebration Red / 1994 S Paris Blue / 1995 Celebration (again!) Red - Currently free of all extramarital cars, wrench-loose and fancy free :)

Post Reply