Available soon: clear side/front markers/indicators
Moderators: jifflemon, coyote1980, Rachel
- Williewammes
- Knows where Volvo is from
- Posts: 140
- Joined: Mon Jan 30, 2006 8:26 am
- Location: The Netherlands
- Contact:
Guys,
Please send me an mail with your Name, e-mail adress and the lightunits that you would like.
In that case I can keep you guys informed per mail so i won't have to send several different PM messages wich will cost more time.
Thank you,
Please send me an mail with your Name, e-mail adress and the lightunits that you would like.
In that case I can keep you guys informed per mail so i won't have to send several different PM messages wich will cost more time.
Thank you,
Greets,
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
- Williewammes
- Knows where Volvo is from
- Posts: 140
- Joined: Mon Jan 30, 2006 8:26 am
- Location: The Netherlands
- Contact:
Hi there,
Still waiting for the materials to arive.
Light units are laying there, prepared to die for a good cause, forming the base for a great ammount of brothers and sisters
There are indeed a lot of people asking for these units.
As soon as some work is ready, I will let you know.
Still waiting for the materials to arive.
Light units are laying there, prepared to die for a good cause, forming the base for a great ammount of brothers and sisters
There are indeed a lot of people asking for these units.
As soon as some work is ready, I will let you know.
Greets,
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
- Williewammes
- Knows where Volvo is from
- Posts: 140
- Joined: Mon Jan 30, 2006 8:26 am
- Location: The Netherlands
- Contact:
- Williewammes
- Knows where Volvo is from
- Posts: 140
- Joined: Mon Jan 30, 2006 8:26 am
- Location: The Netherlands
- Contact:
ace ... lets see some photos ASAP!!Williewammes wrote:Allready started today. Looking good guys!!
Current:
Honda Civic ES I-VTEC
previous:
BMW E46 330i SE Touring
VW Mk4 Golf V6 4Motion
Toyota Celica GT-FOUR ST205 WRC
1995 (M) Dark Grey Metallic 480 Turbo
1994 (M) Flame Red Metallic 480GT
1992 (J) Black Metallic 480ES 1.7i
Honda Civic ES I-VTEC
previous:
BMW E46 330i SE Touring
VW Mk4 Golf V6 4Motion
Toyota Celica GT-FOUR ST205 WRC
1995 (M) Dark Grey Metallic 480 Turbo
1994 (M) Flame Red Metallic 480GT
1992 (J) Black Metallic 480ES 1.7i
- Williewammes
- Knows where Volvo is from
- Posts: 140
- Joined: Mon Jan 30, 2006 8:26 am
- Location: The Netherlands
- Contact:
Down kitty, down
Done the first tests with the moulds. Clusters are looking pretty good alltough I'm still encountering problems with some air that can't get out of the mould. Today I did the second test and tomorow morning I will see the result of that.
Anyway, I will continue till the results are good, so, no worries
You guys will hear again soon.
Done the first tests with the moulds. Clusters are looking pretty good alltough I'm still encountering problems with some air that can't get out of the mould. Today I did the second test and tomorow morning I will see the result of that.
Anyway, I will continue till the results are good, so, no worries
You guys will hear again soon.
Greets,
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
You should get some sort of a vacuum to get that air out. Or some pressurised systemWilliewammes wrote:Down kitty, down
Done the first tests with the moulds. Clusters are looking pretty good alltough I'm still encountering problems with some air that can't get out of the mould. Today I did the second test and tomorow morning I will see the result of that.
Anyway, I will continue till the results are good, so, no worries
You guys will hear again soon.
- Williewammes
- Knows where Volvo is from
- Posts: 140
- Joined: Mon Jan 30, 2006 8:26 am
- Location: The Netherlands
- Contact:
Today I will order the right plastics and will try again with that one. This plastic has a much lower viscosity than the one I tested with, so the ammount of air inside will be much smaller, and it will fill the mould more properly.
If that doesn't work, I will try the vacuümmachine.
Thanks for the advice by the way.
If that doesn't work, I will try the vacuümmachine.
Thanks for the advice by the way.
Greets,
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
Williewammes
Volvo 480 turbo Paris bleu metallic 1992.
Volvo 480 turbo Grey metallic 1987
Check: www.wdesignonline.tk
- levin
- Knows an Aerodeck isn't a 480
- Posts: 232
- Joined: Mon Sep 20, 2004 3:51 am
- Location: Lisbon, Portugal
WE WANT PICS! WE WANT PICS! BUUUURRRNNNNNNN!!!!!!
ooops.... i'm getting kind of anxious
ooops.... i'm getting kind of anxious
[img]http://jdmtech.net/levin/imagens/assinatura.jpg[/img]
[size=75]
My Volvo 480
[b]Name[/b]: Volverine // [b]Type[/b]: TURBO // [b]Year[/b]: 1989 // [b]Colour[/b]: Black Metallic // [b]Engine[/b]: B18FT (1.7), Manual // [b]Mods[/b]: Pollux Black Metallic; Voodoo III MBC[/size]
[size=75]
My Volvo 480
[b]Name[/b]: Volverine // [b]Type[/b]: TURBO // [b]Year[/b]: 1989 // [b]Colour[/b]: Black Metallic // [b]Engine[/b]: B18FT (1.7), Manual // [b]Mods[/b]: Pollux Black Metallic; Voodoo III MBC[/size]
- robin_xr4i
- 480 Expert
- Posts: 629
- Joined: Mon Sep 05, 2005 12:21 pm
- Location: Torbay
What he said!levin wrote:WE WANT PICS! WE WANT PICS! BUUUURRRNNNNNNN!!!!!!
ooops.... i'm getting kind of anxious
[img]http://i15.photobucket.com/albums/a376/robin_xr4i/newsign.jpg[/img]
My old Volvo 480 // Type: Turbo // Year: 1992 // Colour: 305 - Black Metallic // Engine: B18FT // Mods: Rich Mod, Recirculating Piston Dump Valve, Pi Lowering Springs, Induction Kit
My old Volvo 480 // Type: Turbo // Year: 1992 // Colour: 305 - Black Metallic // Engine: B18FT // Mods: Rich Mod, Recirculating Piston Dump Valve, Pi Lowering Springs, Induction Kit