The Hausser Bodykit

naked_monkey · Post by **naked_monkey** » Tue Jan 04, 2005 8:19 pm

hi any one got a body kit for sale or knows were i can get one?

chris1roll · Post by **chris1roll** » Tue Jan 04, 2005 8:49 pm

Back of the queue!!!

Very, VERY rare, you won't get one if you sold both your arms.

dbsvolvos · Post by **dbsvolvos** » Wed Jan 05, 2005 12:49 am

i know of one - but it needs to be persuaded from the hands . weve had this discussion before - if enough people chip up , we can all have copies .

480_rocket · Post by **480_rocket** » Wed Jan 05, 2005 8:45 am

I would love one, is it too much work to make a new bodykit? Sort of cross between the Hausser rear and front of the Volvo original bodykit. Only reason I say that, as I think the Hausser is a little bit too messy at the front. All those vent holes.

robkendall · Post by **robkendall** » Wed Jan 05, 2005 9:41 am

i love em.
put me on queue defo...have mentioned this to dave before.
what would be a ball park figure dave for reproduction of the kit...ie what would it cost me to buy one from you?
if we had that figure, at least you could tempt people into saying yes or no.
I know its difficult to say, because of costs to you of mould materials etc, and the more kits you sell, the cheaper you can do em for etc, but could you give a figure based on say 10, or 20 kits being required?
rgrds
rob

naked_monkey · Post by **naked_monkey** » Thu Jan 06, 2005 3:22 pm

i would be willing to pay anything for one!

dbsvolvos · Post by **dbsvolvos** » Thu Jan 06, 2005 3:33 pm

for a 4 part kit about Â£400 , id need ten firm orders for me to buy the bodykit of you know who .

naked_monkey · Post by **naked_monkey** » Thu Jan 06, 2005 7:08 pm

yeah i would pay Â£400 iam in

Richmann1 · Post by **Richmann1** » Thu Jan 06, 2005 7:44 pm

I should be in depending on timing

Rytis · Post by **Rytis** » Wed Jan 12, 2005 1:56 pm

If somebody brings one set to me to Lithuania, I would organize it much cheaper.... less than 400 pounds for sure.

dbsvolvos · Post by **dbsvolvos** » Wed Jan 12, 2005 2:03 pm

not with shipping to the uk you wouldnt , and i cant beat lackys wages in a lacky country , i wonder why i bother sometimes , anyway nothing happening yet .

Rytis · Post by **Rytis** » Wed Jan 12, 2005 2:16 pm

Shipping could be arranged through transport company (my friends and etc.)

Thought to buy some stuff from you, dbs, but found local producer... He makes everything private, not "a company job", so no taxes etc.

Anyway, it was just a thought.

Murf · Post by **Murf** » Wed Jan 12, 2005 2:28 pm

i wonder why i bother sometimes

i wonder why you bother as well!
someone wants to buy a kit off you to copy and then sell to your customers more cheaply than you can, what a cheek!!

i would buy one off you but im not a fan of bodykits, i prefer the original 480 styling

martinholmesuk · Post by **martinholmesuk** » Wed Jan 12, 2005 3:10 pm

If somebody brings one set to me to Lithuania, I would organize it much cheaper.... less than 400 pounds for sure

someone wants to buy a kit off you to copy and then sell to your customers more cheaply than you can, what a cheek!!

I'm not sure his talking about doing a copy of a copy

Not good if that's the guys idea to take a DBS made kit and sell it again.

Otherwise making/shipping it cheaper, Whats wrong with that?

dbsvolvos · Post by **dbsvolvos** » Wed Jan 12, 2005 4:28 pm

there was a post about keeping the specialists in business ?

Anyway - if you want to buy cheaper go ahead , as always these cheap deals more than most never take off - i dont think Â£400 is especially expensive for a full bodykit , considering the work that will have gone into molding and making it .

He will still have to get a kit in the first place , i dont see anybody offering one to be copied as yet . itll be next xmas the way things are going .

My patience gets a bit thin sometimes .

martinholmesuk · Post by **martinholmesuk** » Wed Jan 12, 2005 4:52 pm

there was a post about keeping the specialists in business ?

I did not see it

Anyway - if you want to buy cheaper go ahead , as always these cheap deals more than most never take off - i dont think Â£400 is especially expensive for a full bodykit , considering the work that will have gone into molding and making it .

Fair play to you.

My patience gets a bit thin sometimes

It's the same for everyone here from time to time.

JohnTurbo · Post by **JohnTurbo** » Wed Jan 12, 2005 5:27 pm

I would never expect to pay less than Â£400 for a bodykit, and at that i mean a mass produced one. Â£400 is bloody cheap for a specialist job, if i had a job i'd get one.

If there is kits to be bought in two years, i would want one for sure.

Not much use now though..

Benji · Post by **Benji** » Wed Jan 12, 2005 9:52 pm

Sorry to appear dim, but what does this kit look like, see it mentioned alot, but i wouldnt know if i got knocked down by one.

robkendall · Post by **robkendall** » Thu Jan 13, 2005 7:18 am

Benji wrote:Sorry to appear dim, but what does this kit look like, see it mentioned alot, but i wouldnt know if i got knocked down by one.

look on club website for hausser bodykit.

I would have one dave, definitely, 400 quid is cheap as far as kits go...cost 200 quid for a half decent front bumper for a dis-astra or something similar...plus the fact that the hausser isnt produced anymore, its a 'proper' 480 kit (regardless of wether copy or not.), and im a big believer in keeping 'home grown' business men in business...no offence to anyone out of the country, just the way i feel.
I was gonna offer a kit for copy (theiss k1), but didnt get the car, and i havent seen pandion on here for a while, as he got it....would be nice if he did....all the old kits arent around anymore, so its not just a case of who wants them, but actually keeping them alive...

If it ever comes off, i will be first on list!
rgrds
rob

V480TI · Post by **V480TI** » Sun Feb 06, 2005 3:15 pm

I have the full Hausser kit now for 2 years , still working on finding somebody that can and will copy.
Have new options now.

Sorry guys, that it takes so long, just a little patience.