Hausser rear spoiler info

[il Conte]

HI guys!
I have a rear spoiler made by Hausser and I would need an info: to secure it on the tailgate is necessary to create holes on the hinges of the tailgate?
Having seen some pictures on internet I wouldn't have many doubts, but, wanting to sell, I'd like to have your confirmation about (especially from those which have one).

Thanks in advance!

[img width=800 height=600]http://i1317.photobucket.com/albums/t62 ... efqdlt.jpg[/img]

[img width=800 height=600]http://i1317.photobucket.com/albums/t62 ... mde5tr.jpg[/img]

Cheers,
Mario

[Slash01]

Open the boot and remove the bolts that secure the glass to the hinges. Warning the glass will fall on you.
Drill the holes through the hinges completely then have a good swear as you try and bolt it all back together.

[480 2.0|T]

The blind holes through the window should have a diameter of 6,5mm.
Additionally to the bolts both sides of the rear spoiler are fixed on the window, which should be pretreated with primer (Sika Glas-Primer 206J), with polyurethane adhesive (SikaFlex-221). The products mentioned are those that were originally used (information from the installation instructions that I have in German).

According to the 'ABE ' (general operating - how it's called in English?) the rear window must remain open by itself with mounted rear spoiler. Could be a problem with some dampers.

Best regards
Florian