Change the gear knob!

EnZo · Post by **EnZo** » Thu May 31, 2007 3:28 pm

I want to change the gear knob whit one from Issota , how do i get out the old one because i don't know??

hjkort · Post by **hjkort** » Mon Jun 04, 2007 9:14 am

ha, ha! you can't!

Well, it can be done, but remember that you need the ring under the knob to be able to put the car in reverse.
Haynes tells you to take a big spanner, which goes under the knob, and then hit it with a hammer...
I removed mine by just pulling..
new shiny knob..

EnZo · Post by **EnZo** » Sat Jul 14, 2007 10:16 am

I change my gear knob finalli after cutting all olt that plastic beacuse was glued there

EnZo · Post by **EnZo** » Sat Jul 14, 2007 10:17 am

i need to post to put a u r l mg

EnZo · Post by **EnZo** » Sat Jul 14, 2007 10:18 am

Now i can post picture whit my car and what i do to it
The gear know is from issota !

stu chacks · Post by **stu chacks** » Mon Jul 16, 2007 4:17 pm

Gawd, tried getting one off a scrap car for WD once as per Haynes Manual instruction and just ended up trashing it. Good luck!

Stu.