Ok, I have the Momo wheel, the half leather interior and I feel the need for a nice black leather gear knob. i havent really looked for one yet but i'm assuming it may be difficult because of the reverse lifty up bit.
Anyone know what to do with this?
pol
Gear knob
Moderators: jifflemon, coyote1980, Rachel
There are two types you can choose from. The lifting up reverse is actually fairly common, so most decent manufacturers have models for both types.
Ryan.
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
- owen080808
- Advanced 480 rookie
- Posts: 590
- Joined: Sat Nov 05, 2005 2:24 pm
- Location: Glasgow/Perthshire
- Contact:
i just replaced my gearknob, put the standard volvo one back on in place of the somewhat scruffy momo one which came with the car. shifting now is much better as the momo one was sort of perched right at the end of the lever (hence making it longer) to allow the reverse lift action, i would advise either get one which fits properly (nice and low on the lever) or the feel of shifting will suffer. just my .02
Currently car-less
| '92 turbo + Rich mod | Sold
| '90 turbo + Seized engine | gone to the volvo dealer in the sky
[img]http://i32.photobucket.com/albums/d4/owen080808/480%20turbo/avatar.jpg[/img]
| '92 turbo + Rich mod | Sold
| '90 turbo + Seized engine | gone to the volvo dealer in the sky
[img]http://i32.photobucket.com/albums/d4/owen080808/480%20turbo/avatar.jpg[/img]
- martinholmesuk
- Friend of Club 480 Europe
- Posts: 10049
- Joined: Thu Sep 05, 2002 9:43 pm
- Location: West Sussex
- robkendall
- 480 Is my middle name
- Posts: 2694
- Joined: Mon Mar 29, 2004 11:28 am
- Location: 2nd star on the left and straight on til morning
you could always remove the lift up bit, and modify it to a lever or something.....easy enough to do.....
that way you can have any knob you want
rgrds
rob
that way you can have any knob you want
rgrds
rob
Warning! This post may contain traces of humour, sarcasm or wit. In case of allergic reaction call 0800 123 456 for free and confidential abuse. [img]http://img.photobucket.com/albums/v192/saracen480/spank.gif[/img]
[img]http://img.photobucket.com/albums/v192/saracen480/armynewx.jpg[/img]
[img]http://img.photobucket.com/albums/v192/saracen480/armynewx.jpg[/img]