Front spoiler in the works
Moderators: jifflemon, coyote1980, Rachel
- coyote1980
- Volvo 480 Club Europe CREW
- Posts: 2972
- Joined: Thu Jan 03, 2002 12:18 pm
- Location: Groningen, The Netherlands
- Contact:
its the light reflecting. Not the thing it self. The spoiler does have some weird spots. But just holding it on to see where some craks might come out. And where it would be weak.
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
I'm not sure how low down yours is compared to mine, but make sure the leading edge is well reinforced as mine is constantly grounding on speed bumps, uneven road surfaces etc etc. Luckily we built it thick and sturdy at the front so it just scrapes the under side as opposed to smashing it off! All other areas should be fine as far as ground clearance goes!
Ryan.
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
planning on some lowering springs so it gets lower. At the moment its as low as the cars bottom itself. And the front is 3 layers of fiberglass, thick layers and behind it I left the Fome I used for a mold and behing that is another 2 layers of fiberglass. I hope it holds
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
Wow, I'm sure that'll be more than enough! I've only got 3 layers on my leading edge and it's more than enough! I don't think you'll have a problem, you just have to be careful how fast you go over speed bumps etc etc.
Ryan.
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
I still don't like how it looks and I think gona redo it. Now I got myself a another front bumper. So I might get it a bit better this time. Last time I had to make the mold on the car. This time it might be a bit better.
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
Yeh it's much easier, I moulded mine onto an old '89 ES bumper I had in the garage to get the shape right and help visualise what I wanted, then chopped it off, and stuck it on the real bumper. Pain in the arse getting it sprayed the same colour though, cost me around £70, when I'd made the spoiler for free using offcuts from dad's workplace
Ryan.
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
1992 480 ES, 110k, Paris blue, custom SS side-exit exhaust, De-catted, custom fibreglass lightweight bonnet, custom fibreglass front spoiler, stripped interior, Slate Black textured metal paint throughout, Cobra Imola S drivers Seat, Ricco 4 point 3 inch harness, Magnecor KV85 leads.
Current Status: A very impressive track car. :-D
- Ettore Bugatti
- 480 Is my middle name
- Posts: 1273
- Joined: Tue Mar 18, 2003 1:58 pm
- Location: not in a Volvo 480
New one is now ready for another winter test run. It started snowing again so a free snowblow in the evening.
The car has a nice happy face now
NB!!!! Should I paint the grill black or leave it silver
The car has a nice happy face now
NB!!!! Should I paint the grill black or leave it silver
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
- Big Brother
- Moderator
- Posts: 5128
- Joined: Sun Sep 26, 2004 6:51 pm
- Location: North Wales
- Dan the 480 Man
- 480 Is my middle name
- Posts: 2269
- Joined: Thu Jan 08, 2004 7:42 pm
- Location: No longer in a Volvo...(But not forever!)
- Contact:
This mesh just covers up a hole size of the egggrate and lover part under itDan the 480 Man wrote:I'm not really into big bumper holes with mesh, but that looks quite nice-would look really nice with a nice alloy intercooler behind it...
not at the moment. And painted the mesh black so that it wouldn't stick out that much. Silver was to boyracer.POE wrote:very nice ,any other mods in mind?and yes it does look very happy
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
Car at my workplace. As you can see I work for a firm that makes all kinds of stuff from concrete. And she realy needs a wash. But that is soon to come cos we have over 0 C in here temp. Yeah, the spring is coming along.
PS: My car looks small compared to Toyota Yaris Now that is strange.
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
- Ettore Bugatti
- 480 Is my middle name
- Posts: 1273
- Joined: Tue Mar 18, 2003 1:58 pm
- Location: not in a Volvo 480
Mesh is made from polished aluminium so the paint doesn't want to stick to it. So the black paint is coming off aginEttore Bugatti wrote:The new spoiler looks very good!
Hhhmmm, how would it look if you painted in white Volvo on the mesh?
1996 850R 2.0 T5 - "Beebi R"
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold
1994 480 Turbo - RichMod - sold to get the R
1992 850 2,5 20V - sold to get the R
1987 744 TIC - Haas Tuning - totaled by BMW
1973 142 GL B20E - sold