Volvo 480 Club Europe

Posted: **Mon Jan 23, 2006 9:10 pm**

Can anyone confirm the torque setting for the under piston oil spray jets on the B18FT, just rebuilding the block but i dont have the data on the torque settings for these jets

Posted: **Mon Jan 23, 2006 9:51 pm**

Pritty please

Posted: **Tue Jan 24, 2006 12:29 am**

Pritty, pritty please with sugar one top

Posted: **Tue Jan 24, 2006 1:40 am**

got manual infront of me dave, but cant find oil spray things in it!

steve

Posted: **Tue Jan 24, 2006 9:25 am**

rapid R5 wrote:got manual infront of me dave, but cant find oil spray things in it!

steve

Thats weird, ill just tighten them right up then.

Posted: **Tue Jan 24, 2006 10:35 am**

I've found my local Volvo service centre are really helpful Dave (not saying they all are though), try them if your stuck with tech question forum/Haynes can't answer? Better safe then sorry.

Stu.

Posted: **Tue Jan 24, 2006 8:44 pm**

stu chacks wrote:
I've found my local Volvo service centre are really helpful Dave (not saying they all are though), try them if your stuck with tech question forum/Haynes can't answer? Better safe then sorry.

Stu.

Might have to give them a call, the oil sprayers can still be reached with the crank in so they will still have access for the next few days any way

Posted: **Wed Jan 25, 2006 1:48 pm**

I saw a engine rebuild manual on this page. Unfortunately it was no longer available on the server.

Could someone post it again?

Posted: **Sun Mar 01, 2020 7:09 pm**

Did you ever find out the torque values for the oil sprayers ?

Posted: **Sun Mar 01, 2020 7:16 pm**

As I said on facebook, go Tight, add locktite

(so sort of 22-25 lbft)

Posted: **Mon Mar 02, 2020 7:12 am**

The official figure from Renault is 19NM with no Loctite

Volvo 480 Club Europe

Urgent - Torque settings

Urgent - Torque settings

Re: Urgent - Torque settings

Re: Urgent - Torque settings

Re: Urgent - Torque settings