Page 1 of 1
auto/manual ecu
Posted: Sun Aug 02, 2015 8:45 am
by doingitsideways
I'm considering a manual conversion.
The car has a Robou ecu, so I was wandering if there's any difference in the ecu, or will I have to make any other changes?
Re: auto/manual ecu
Posted: Sun Aug 02, 2015 11:02 pm
by glasgowjim
steve is it a 2ltr NA car if so read off the serial/part number off of the ECU and post up here.
Re: auto/manual ecu
Posted: Sun Aug 02, 2015 11:46 pm
by doingitsideways
Sorry Jim, I'm talking about the 460T.
Turbo and currently auto, looking to convert to manual. Also Roboumodded, don't know what effect that may have.
Hopefully, The Oracle himself will be along to enlighten us with his wisdom
Re: auto/manual ecu
Posted: Mon Aug 03, 2015 10:14 pm
by Robou
Can't resist. Same ECU is used in both manual and automatic. Ignore the switches under the selector, my mod controls torque in a different way.
Re: auto/manual ecu
Posted: Mon Aug 03, 2015 10:45 pm
by doingitsideways
Thanks, R-Oracle-Bou
Although, switches under the selector?
Not stripped the car down yet, but if I find any, I'll ignore them
I only asked in the OP because I seem to remember reading something about one pin going to ground on manuals, providing more torque or something.
Could be talking crap.
Re: auto/manual ecu
Posted: Tue Aug 04, 2015 10:20 pm
by Robou
Less torque in reverse. Switch under the gear shift. I bet you guessed that.