can i uses these injectors

[clio 480 turbo]

may have found out that my injectors have packed up, but i bought a set of volvo 740 2.3 turbo ones of this forum a couple of years ago from (johnturbo) 315cc flow rate could i uses these instead my car has rich mod uprated t2 turbo fmic, mbc etc or will these be to much for the car

[Sieger]

if they are high impendance you can use them.

http://www.injectorcleaning.co.uk/flow.htm

[clio 480 turbo]

dont undertand, this is the part number on them 0280150804

[volviz]

These are low resistance, so will not fit directly.
But resitance box can be puted in circuit to make them work

But also I see that you have rich mod, so you shoud contact johnturbo, cause.... Richard used to adapt factory ecus for low resistance injectors too....(just check the injectors that you have in car..and use with the similar resistance).

[clio 480 turbo]

injectors in the car are stock

[Sieger]

hi i use volvo 740 2.3 injectors atm they are 227 cc

0280150749

[volviz]

injectors in the car are stock

so you can't use 0280150804