Nonce with a MBC!

sambo · Post by **sambo** » Sat Jul 05, 2008 12:22 pm

Hi guys!

Ok well I have a richmod and a MBC fitted. But Im starting to worry about the stress the engine is going under....

Anyway, Iv decided to take out the MBC and run the normal original electronic one instead. But, Iv forgotten where each of the 3 pipes go! Anyone help me out with some quick advice please???

NATHANWALLER THE 480 NUTT · Post by **NATHANWALLER THE 480 NUTT** » Sun Jul 27, 2008 4:28 pm

Did have it wrote down but cant remember much more than red actuator hose goes in the middle...

There are some good posts on here somewhere with pics that will tell you the rest.....

Ben Harris · Post by **Ben Harris** » Mon Jul 28, 2008 8:49 am

Mine has:

Top - Black
Middle - Red
Bottom - Transparent.

Ben.

Captain Crunch · Post by **Captain Crunch** » Mon Jul 28, 2008 2:40 pm

Top hose: to intake turbo hose just before turbo
Middle hose: to actuator
Bottom hose: to brass outlet on pressure tube after turbo

sambo · Post by **sambo** » Tue Jul 29, 2008 3:56 pm

cheers for your help guys! I'm back at home this weekend so will venture into it when home