blue ecu on to orange ecu???

clio turbo · Post by **clio turbo** » Tue Jun 10, 2008 5:07 pm

any one no how to get it to work with out changing flywheels?

pol · Post by **pol** » Tue Jun 10, 2008 5:38 pm

You didn't rush out and buy the wrong coloured ECU per chance did you?

pol

clio turbo · Post by **clio turbo** » Tue Jun 10, 2008 5:40 pm

no just been offed one at the right price.

yknot · Post by **yknot** » Tue Jun 10, 2008 7:36 pm

both ecu's will work, depending on flywheel sensor

clio turbo · Post by **clio turbo** » Tue Jun 10, 2008 8:40 pm

so if i get a sensor from a blue label it will work?i have a sensor from a red label that should be same?

yknot · Post by **yknot** » Thu Jul 03, 2008 6:04 pm

it's about a extra ground to a certain ecu pin if you want to swap ecu's... i read this here... somewere...

chris1roll · Post by **chris1roll** » Thu Jul 03, 2008 6:15 pm

The flyweels are identical, as has been said. The difference I have found is the number of wires from the flywheel sensor, and of course the loom it connects to. Unfortunately I don't know what the extra wire does......

clio turbo · Post by **clio turbo** » Thu Jul 03, 2008 6:17 pm

so its a matter of swaping looms?i have a loom with red ecu will blue work on that?

chris1roll · Post by **chris1roll** » Thu Jul 03, 2008 6:22 pm

The red ECU will work with either, so unfortunately thats not really a way of telling...however, how many wires does the flywheel sensor on both your looms have? If they are different different then the one that isn't with your orange ECU should work with the blue one, if you see what I mean

clio turbo · Post by **clio turbo** » Thu Jul 03, 2008 6:23 pm

ill have a look i no orange has 3 wire

yknot · Post by **yknot** » Thu Jul 03, 2008 7:16 pm

http://volvo480.dragons.org.uk/forum/vi ... hp?t=13944

clio turbo · Post by **clio turbo** » Thu Jul 03, 2008 8:10 pm

so may work.lol