HOW Do I install this MBC?

MatBat · Post by **MatBat** » Sat Jan 10, 2004 5:24 pm

martinholmesuk wrote:
dragon got told off well not realy just dragon got proved wrong never thought id see the day
Who upset you?

johnd · Post by **johnd** » Mon Jan 12, 2004 12:05 pm

My engine runs at around 100 after the MBC was installed. Im just going to get the oil changed to a better type........or keep my foot off the throttle!

John

Jamo · Post by **Jamo** » Mon Jan 12, 2004 2:22 pm

You think thats bad, try a motor way run with a T25 turbo, FSE valve and 1 bar boost with hybrid cam........

My poor oil temp is way high!

johnd · Post by **johnd** » Mon Jan 12, 2004 5:59 pm

I wonder what oil they use in F1????

John

doug_480_turbo · Post by **doug_480_turbo** » Tue Jan 13, 2004 8:53 pm

yeah mine was up to 106 when i was 5200rpm in 5th gear (on my own private duel carrageway of course).

i need to sort my speedo

Peter vd P · Post by **Peter vd P** » Thu Jan 15, 2004 9:23 am

Ok so I received my MBC last tuesday but still haven't figure out how to install it.
Went to a car tuner yesterday and he did not know how to install it either (what a wanker)

http://www.autotuningmegastore.nl/

So I set all my hopes on you Dragon

to send me your pictures.
Oooooh I am so exited, I can't wait to install it and make a test drive.

Ok had to spill my hart out................

martinholmesuk · Post by **martinholmesuk** » Thu Jan 15, 2004 11:20 am

Peter, Your going to have lots of turbo fun with it!

Peter vd P · Post by **Peter vd P** » Thu Jan 15, 2004 11:34 am

Martin, I am sooooooo jealous of you. you have all the fun cause you can feel all that turbo pressure and all i feel is clumsiness

martinholmesuk · Post by **martinholmesuk** » Fri Jan 16, 2004 7:48 pm

Did you get the DBS one? It's simple to install I'll get some pics if you want!

dragon · Post by **dragon** » Fri Jan 16, 2004 9:46 pm

Erm, it is in hand...

martinholmesuk · Post by **martinholmesuk** » Fri Jan 16, 2004 10:39 pm

dragon · Post by **dragon** » Sat Jan 17, 2004 1:37 pm

Peter, you have mail!

doug_480_turbo · Post by **doug_480_turbo** » Tue Jan 20, 2004 7:15 pm

at the moment i have my dbs mbc then followed by my in car bleed valve, is this best way or would i be better having the other way round??

martinholmesuk · Post by **martinholmesuk** » Tue Jan 20, 2004 7:32 pm

I took the pipes off the old boost and fitted it to my MBC.

martinholmesuk · Post by **martinholmesuk** » Thu Jan 29, 2004 3:16 pm

Mat made a place for it to go

dragon · Post by **dragon** » Thu Jan 29, 2004 3:17 pm

I just tie wrap them to the big air pipe...

Your bracket looks nice though

martinholmesuk · Post by **martinholmesuk** » Thu Jan 29, 2004 4:53 pm

No drilling needed. You should have a go. or u getting rid of it?

dragon · Post by **dragon** » Thu Jan 29, 2004 4:57 pm

Wesonally im my own car, mine is attatched to the strut brace - it was fnord's car I wrapped it to the airpipe - no not getting rid of mine, just setting it on max and fogetting about it really.

greasy mits · Post by **greasy mits** » Sat Oct 18, 2008 10:18 pm

where can i purchace one of these

chriskay · Post by **chriskay** » Sun Oct 19, 2008 9:38 am

greasy mits wrote:where can i purchace one of these

http://www.hlmtuning.co.uk/
Ask for Hamish.
I suggest this because it's near you. Best to take the car to him & let him set it up for you on the dyno.

Volvo 480 Club Europe

HOW Do I install this MBC?

Aaaaaaaarrrrrggggggggghhhhhhh

mbc