Volvo 480 Club Europe

I think that takes the vacuum for the engine and sort of damps it out and acts a a reservoir of vacuum power for the ventilation push buttons.

James is correct, thats exactly what it's for.

Thanks guys, you were right, about the stove, now another question, finally got to the connection, preferably show in the photo where the tubes from the Throttle go, and from the electric inflation valve, I would be grateful, I’m also interested in how the electrical wiring braid is located It would be great if a detailed video was made! who has a turbo, the desire to wish everything is right, there is not much in the books, I have 3 books tired of looking for where everything goes.

Hi all people! The work is in progress, the car is being built, the motor went over, the box went through, everything is buzzing, it is good that the engine no longer troit, and it runs smoothly, the speed does not float. Yesterday I made a new exhaust system from a stainless pipe with a diameter of 63 mm, right now I'm doing a cast and updating all the electrics. I have a request, is there a thread from England from the city of Southampton, or maybe someone nearby? is there a person ready to give my friend who also restores Volvo spare parts and send them to him? he has no opportunity to come because he lives in Kazakhstan, in Astana. All expenses will of course be covered. you can also take away from this person 2 wheels on the original disks, can anyone need it ?!

Hi all!
Help me pick up or at least find analogues of the relay!
I’m interested in a relay that is located under the hood under the letters “G” “B” “C”, I doubt that I will find an original here, well, at least I’ll pick it up, I had some incomprehensible ones, and they closed the network for me when I started to launch a new electrical wiring!

Hi all!
Tell me where I can see the wiring of the vacuum hoses that come from the turbine and from the solenoid valve, which is located near the high-voltage coil. I’m looking for information and can’t find it, the vacuum from VEM and from EZ found everything clear, but I can’t find it on the turbine! Help!

Hi people!
Why doesn't anyone know the answer to my question?
Can you show pictures or photos of how your hoses are going?

Hopefully this post contains the information that you need:
viewtopic.php?f=11&t=34487&p=208024&hil ... ur#p208024

Thank you friend! it helped me a lot!