Page 3 of 5
Re: Volvo 480 Turbo from Siberia
Posted: Mon Sep 13, 2021 10:37 am
by jifflemon
Re: Volvo 480 Turbo from Siberia
Posted: Mon Sep 13, 2021 11:40 am
by Spainal
doesn't look like it, but maybe it will do! It is interesting to replace everything regarding the dimming!
Re: Volvo 480 Turbo from Siberia
Posted: Mon Sep 13, 2021 4:23 pm
by Spainal
The question arose when reading an article about 3D, who does not tell me where to buy mechanisms from the seats so that they would recline ?! I have them broken and they are not simple, only the wire sticks out for which I pull to deflect the seats!Maybe someone will make a 3D model so that I would print it, I have no opportunity to make it since it does not exist at all!
Re: Volvo 480 Turbo from Siberia
Posted: Wed Sep 15, 2021 4:56 pm
by malkontent
Must check in my treasures
Re: Volvo 480 Turbo from Siberia
Posted: Thu Sep 16, 2021 10:12 am
by Spainal
malkontent wrote: ↑Wed Sep 15, 2021 4:56 pm
Must check in my treasures
Hey malkontent!!!
I would be very grateful for your help!
and then in my seat on the side of the current hole and sticks out the cable!
Re: Volvo 480 Turbo from Siberia
Posted: Thu Sep 16, 2021 10:33 am
by malkontent
found these
Re: Volvo 480 Turbo from Siberia
Posted: Thu Sep 16, 2021 10:36 am
by malkontent
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 4:35 am
by Spainal
Do you sell them or not? can you do a 3D scan of the part?
by chance there is no mechanism itself? otherwise I have not yet disassembled my seats and I do not know if there is a mechanism there!
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 7:08 am
by malkontent
Hi
I have 3 cars for spares , 1.7 , 2.0 and Turbo , have also in my treasures a wire which is attached to knob and the rest of a mechanism . We moved to a country so I have now a BARN
, but it takes a time to find spares after relocation . Spares from foto are for sale now . About scannig , I am not so inteligent , sorry .
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 7:18 am
by Spainal
malkontent wrote: ↑Fri Sep 17, 2021 7:08 am
Hi
I have 3 cars for spares , 1.7 , 2.0 and Turbo , have also in my treasures a wire which is attached to knob and the rest of a mechanism . We moved to a country so I have now a BARN
, but it takes a time to find spares after relocation . Spares from foto are for sale now . About scannig , I am not so inteligent , sorry .
With you, how is it possible where the thread will be written off? Viber? Telegram? Watssap? ICQ? Skype? =) what would be faster!
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 7:36 am
by malkontent
sorry , I do not understand , you mean when I`ll find spares ? For communication my mail
m48j@interia.pl , Scype is also ok. Have also Green Books , Volvo Service Literature , in german but very useful , many fotos and drawings .
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 7:41 am
by Spainal
malkontent wrote: ↑Fri Sep 17, 2021 7:36 am
sorry , I do not understand , you mean when I`ll find spares ?
No, can I contact you through messengers?
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 7:54 am
by malkontent
see above
Re: Volvo 480 Turbo from Siberia
Posted: Fri Sep 17, 2021 2:20 pm
by malkontent
set for one seat
3120502x 2 screw
3465972 x 1 cover
3465971 x 1 knob
25€ + Post
Re: Volvo 480 Turbo from Siberia
Posted: Mon Oct 11, 2021 5:46 am
by Spainal
Hello everyone!
The case is not moving as fast as we would like, but it is moving!
Winter has come for us, it's snowing already today! and already a minus.
I have a question, I started wiring while my engine is being put in order and everything is measured.
There are no chips on the sensor, how to find out their number and how they look, because I have simple wiring included in it!
Air conditioner chip under the hood, yellow 2-pin connector.
Tell me his number, I will try to buy and deliver it.
Re: Volvo 480 Turbo from Siberia
Posted: Sat Oct 30, 2021 8:14 am
by Spainal
Hello everyone!
I ask for help looking for the bushing of the malsenny pump.
I did not find anything in the books, there is no number, or tell me what they changed.
Re: Volvo 480 Turbo from Siberia
Posted: Sat Oct 30, 2021 8:21 am
by jamescarruthers
“Malsenny” pump may need a better translation. Can you describe it, please?
Re: Volvo 480 Turbo from Siberia
Posted: Sat Oct 30, 2021 10:09 am
by Alan 480
jamescarruthers wrote: ↑Sat Oct 30, 2021 8:21 am
“Malsenny” pump may need a better translation. Can you describe it, please?
maybe the circulation pump for the turbo????
Re: Volvo 480 Turbo from Siberia
Posted: Sat Oct 30, 2021 11:16 am
by Spainal
Here is the Widget on the Shaft
As I understand it, there is something like that
Re: Volvo 480 Turbo from Siberia
Posted: Wed Nov 03, 2021 3:10 am
by Spainal