Any Headunit Guru's in the house?

catgroom · Post by **catgroom** » Mon Feb 20, 2006 9:20 pm

I just cant bear to see you leaving,

Im beggin you dont goooo.

Rikaitch · Post by **Rikaitch** » Mon May 08, 2006 9:03 pm

Getting back to the topic at hand, can I offer my experience?

I find a permanent 12 volt using a multimeter on the existing wiring loom, and also the ground (usually brown).

I then took a patch lead from the fan (because the fan's only on when the key's at position 1). Connect these to a standard ISO connector, and the headunit will always come on, albeit without sound. I then locate the four pairs of wires, and buzz each pair to make sure the resistance is 4 - 16 Ohms. I then take a single output feed from the headunit and find which pair of wires is which speaker. Put them onto the right pins on the iso connector, and Robert's your father's brother.

Oh, and give me original Ratpack or Nicky Blackmarket anytime.

ReVolvoLution · Post by **ReVolvoLution** » Mon May 08, 2006 10:15 pm

wtf happened to the pic of my headunit?!?!?!?!?!?!?!

sorted this one a wee while ago Rikaitch but it would apeer i've now had to resort to a big black woman with a karaoke machine!!! By the looks of her shes also my alarm too.......