So I decided to add a switch! For ages now, the switch was just a button attached to 3 wires, hanging in the glove compartment, awaiting the final resting place.
The other week I chose the box I wanted and put the switch into the box, and then, with no real ideas coming to me of where to put it (it had to be visable to prevent me from forgetting to switch it off-hence the lighted switch as opposed to a plain switch).
Eventually the idea came to me (OK, I admit, it was a suggestion from the other half
) Hows about a removeable switch, that way I wouldnt have to worry about a place to affix the switch, and therefore no unsightly cuttings of the interior trim, no boxes stuck to random bits of trim and still somewhere that I can see clearly from the drivers sea (So NOT the glove box!!)And this is how it has ended up!!
What do you all think? In my opinion, its very tidy, hasn't damaged any trim, its removeable to deter thieves, its clearly visable to prevent battery drainage and its not having to be affixed to any trim permanently!!
@ Cerby - you should be so proud of me! So far I have only blown 2 x 10amp fuses, 1 x 15amp fuse and completely knackered 1 jack socket!!!
) soldered it all together and voila!