Controller CD401
Moderators: jifflemon, coyote1980, Rachel
-
- 480 Newbie
- Posts: 5
- Joined: Thu Nov 29, 2007 2:23 pm
Controller CD401
Hi,
Has never someone mounted a controller CD-401 in our 480's?
I bought one but i didn't understand how to fit it and if it's necessary a fitting kit!
If someone mounted in his 480 can he send me some pictures?
Thanks
Francesco
Has never someone mounted a controller CD-401 in our 480's?
I bought one but i didn't understand how to fit it and if it's necessary a fitting kit!
If someone mounted in his 480 can he send me some pictures?
Thanks
Francesco
- coyote1980
- Volvo 480 Club Europe CREW
- Posts: 2972
- Joined: Thu Jan 03, 2002 12:18 pm
- Location: Groningen, The Netherlands
- Contact:
-
- 480 Newbie
- Posts: 5
- Joined: Thu Nov 29, 2007 2:23 pm
-----Thanks for the your answer......
I found an equalizer on ebay and in fact it goes in the space near the ash tray......i thought that the controller had to go on the space above but it is too much tall!!!!
Anyway tomorrow i'll go to Volvo to see if they know something about it!
As just i saw these accessories on this site i fell in love with them and i should want to install everything possible on my 480
I saw that near the picture there is a code about a fitting kit for 400 series....
Tomorrow i'll go to Volvo with the part number
Thanks Francesco
I found an equalizer on ebay and in fact it goes in the space near the ash tray......i thought that the controller had to go on the space above but it is too much tall!!!!
Anyway tomorrow i'll go to Volvo to see if they know something about it!
As just i saw these accessories on this site i fell in love with them and i should want to install everything possible on my 480
I saw that near the picture there is a code about a fitting kit for 400 series....
Tomorrow i'll go to Volvo with the part number
Thanks Francesco
-
- Knows an Aerodeck isn't a 480
- Posts: 208
- Joined: Wed Apr 20, 2005 11:24 pm
- Location: Finland
Hello Francesco,
Yes you´ll need the fitting kit: 1384 594! It´s the same kit for cd-401, tp-701 and eq-611/6117.
Unfortunately if you want to keep it original, as it could have left the factory,
there was at once only one of the upper accessories. It´s the place over the ash tray.
However in the space above it, there was an option to fit a cassette holder kit and for extra cost also one with a temperature gauge in the highest cassette holder. I have that and a tp-701 fitted:
As a radio I have SR-701 with a 5-level equalizer.
However if you still would like to find an own solution and fit both cd-401 and eq-611 it should be fine with at least radio CR-901, as it has sockets for both.
Would surely look ace, if the upper was mounted and sorted with a "factory feeling" looking job! There would still be left a mini storage space over it.
Regards,
Anton
Yes you´ll need the fitting kit: 1384 594! It´s the same kit for cd-401, tp-701 and eq-611/6117.
Unfortunately if you want to keep it original, as it could have left the factory,
there was at once only one of the upper accessories. It´s the place over the ash tray.
However in the space above it, there was an option to fit a cassette holder kit and for extra cost also one with a temperature gauge in the highest cassette holder. I have that and a tp-701 fitted:
As a radio I have SR-701 with a 5-level equalizer.
However if you still would like to find an own solution and fit both cd-401 and eq-611 it should be fine with at least radio CR-901, as it has sockets for both.
Would surely look ace, if the upper was mounted and sorted with a "factory feeling" looking job! There would still be left a mini storage space over it.
Regards,
Anton
-
- 480 Newbie
- Posts: 5
- Joined: Thu Nov 29, 2007 2:23 pm
Thank you soooooo much!!!!
It looks like anyone knows about these accessories, and instead you are very prepared!!!!
So now there is abig problem because i have your same radio sr 701 controller cd401 and on this week will arrive a changer another two radios and the equalizer
I am searching the radio cr901 but is impossible to find!
Does anyone have this model to sell???
It looks like anyone knows about these accessories, and instead you are very prepared!!!!
So now there is abig problem because i have your same radio sr 701 controller cd401 and on this week will arrive a changer another two radios and the equalizer
I am searching the radio cr901 but is impossible to find!
Does anyone have this model to sell???
-
- Knows an Aerodeck isn't a 480
- Posts: 208
- Joined: Wed Apr 20, 2005 11:24 pm
- Location: Finland
You´re welcome! I think these are cool original accessories!
CR-901 was in many Volvos at the time(if you get it from an other than 400, 760 88- or 960 91- you propably need the dash kit: 1384 583), so you should be able to find one eventually. Also at least CR-708 has the same option to add the eq and cd-401.
Regards and good luck, allways worth a try in the marketplace: Parts, Accessories & Brochures!
Anton
CR-901 was in many Volvos at the time(if you get it from an other than 400, 760 88- or 960 91- you propably need the dash kit: 1384 583), so you should be able to find one eventually. Also at least CR-708 has the same option to add the eq and cd-401.
Regards and good luck, allways worth a try in the marketplace: Parts, Accessories & Brochures!
Anton
-
- 480 Newbie
- Posts: 5
- Joined: Thu Nov 29, 2007 2:23 pm
-
- Knows an Aerodeck isn't a 480
- Posts: 208
- Joined: Wed Apr 20, 2005 11:24 pm
- Location: Finland
Francesco, that would be great sounds promising! Try to get the pictures here so everyone can see! www.photobucket.com for example is very handy.
Regards,
Anton
Regards,
Anton
- bbf
- 480 Is my middle name
- Posts: 994
- Joined: Tue Dec 23, 2003 10:21 am
- Location: Na soncni strani Alp (SLO)
- Contact:
hi!
have a question or two:
Where does the CD-401 fits to? does it fit into the place for cassete holder, it looks narrow, maybe only in place where actual cassetes are?
what about the TP-7045CD, it is only the cassete player with changer control, so it needs an aditional changer unit, as the CD-401 does? are these changer units same for both controlers and what are they named?
someone offered me a brand new SR701 unit and was thinking, how hard is to get a 401 and changer that fits 401.
have a question or two:
Where does the CD-401 fits to? does it fit into the place for cassete holder, it looks narrow, maybe only in place where actual cassetes are?
what about the TP-7045CD, it is only the cassete player with changer control, so it needs an aditional changer unit, as the CD-401 does? are these changer units same for both controlers and what are they named?
someone offered me a brand new SR701 unit and was thinking, how hard is to get a 401 and changer that fits 401.
'98 S40 T4, replacement vehicle, hardcore power
'86 480 ES, RIP :(
'91 480 Turbo, RIP :(
'93 480 2.0, RIP :(
'90 480 Turbo, hailed roof, fighting wounds, 260.000km, daily bolide :)
'81 345 GL cvt, waiting for a new life, 200.000km :)
'82 244 GL 2.4D 250.000km restoration project
[url]http://img13.photobucket.com/albums/v37/bbfbbf/[/url]
'86 480 ES, RIP :(
'91 480 Turbo, RIP :(
'93 480 2.0, RIP :(
'90 480 Turbo, hailed roof, fighting wounds, 260.000km, daily bolide :)
'81 345 GL cvt, waiting for a new life, 200.000km :)
'82 244 GL 2.4D 250.000km restoration project
[url]http://img13.photobucket.com/albums/v37/bbfbbf/[/url]