Page 1 of 1

How to : undo the leather from the seats?

Posted: Tue Jan 24, 2006 8:27 am
by Bakke
Hey guys, a friend of mine got himself a new 95 leather interior. The strange fact is that his new seats have no heating? Is this possible, I allways tought all leather seats were heated???

So, if it is true that they are not heated, we would like to switch the old heater matrix from his previous interiour in the new seats...

Anyone who can guide me how to take the seats apart. During the process I'll take pictures, could come in use for others too ...

Greetz
Bakke

Putting heat !

Posted: Sat Feb 04, 2006 9:47 pm
by JeanPete
Hi Bakke ! How are you ? I'm also interested, 'cause my leather interior has no heating seats. :cryhard:

P.S. : I think that Vega did it yet, when he repaired his ES'seats. ;)

Posted: Sat Feb 04, 2006 11:00 pm
by Milosz_480
It's quite simple. You've got to remove 2 metal clips from corners of seat, then using pliers remove some wire clips.
If you'd like can take some pics of stuff to remove ;)
Before doing this job get some thick copper wire. It's easier to put leather back on seat than with original Volvo wire.

Posted: Mon Feb 06, 2006 7:52 am
by Bakke
Hey Miloz,
Yes please, could you get me some pictures? Would be very helpfull.
Thanks
Bakke

Posted: Wed Feb 15, 2006 11:19 pm
by Milosz_480
Sorry that I kept you waiting but it;s a llitle bit too cold here to remove seats, but I found sth like this. Maybe useful ;)
Image
Image
Image
Image
Image
If you need better quality I can post you whole pdf file 9MB.

Posted: Thu Feb 16, 2006 7:19 am
by Bakke
This will be very useful !! thanks a lot

Posted: Thu Feb 16, 2006 1:46 pm
by Joolz
Does he have no heated seats switch or does he have a switch and nothing happens when he turns it on?

I have leather seats and they take a good deal longer to warm up than the cloth ones :wink:

Posted: Thu Feb 16, 2006 3:41 pm
by Bakke
They are replacements for my older seats. My older seats do have wires coming out of the bottom to connect to the electric system, my new seats however don't have this wires comming out ...

Posted: Fri Feb 24, 2006 1:50 pm
by volvomania
Bakke,

Just have him call me.
It is quite easy and shouldn't take to long......