Page 1 of 1
How do I fit a rear washer nozzle?
Posted: Sun Jun 21, 2020 1:08 pm
by MisterH
Jifflemon very kindly gave me a replacement rear screen wash nozzle as my current one is broken. The only issue is that I do not know how to fit it, and I have a horrible feeling I have to take the interior apart to do it.
Can anyone share their experiences with this?
Many thanks
Ben
Re: How do I fit a rear washer nozzle?
Posted: Sun Jun 21, 2020 1:26 pm
by arthuy
There is a nut on the inside of the pillar which you have a high chance of dropping down the inside of the pillar.
You need to remove the trim but easy enough.
Re: How do I fit a rear washer nozzle?
Posted: Sun Jun 21, 2020 1:54 pm
by MisterH
How do I remove the trim around the pillar? I've got halfway there with the window side but am having trouble with the boot seal side. I've tried prying it out with screwdrivers but fear breaking something
Re: How do I fit a rear washer nozzle?
Posted: Sun Jun 21, 2020 2:14 pm
by dcwalker
The grey c pillar trim is held on by two clips, you just need to be firm with it!
David
Re: How do I fit a rear washer nozzle?
Posted: Sun Jun 21, 2020 2:55 pm
by Alan 480
dcwalker wrote: ↑Sun Jun 21, 2020 2:14 pm
The grey c pillar trim is held on by two clips, you just need to be firm with it!
David
by firm read 'brutal'
