Page 1 of 1

Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 9:04 pm
by mathrock
I just got a 1993 Volvo 480 Turbo imported into the US. Since it's finally in my possession I have time to fix up the little odds and ends that are broken.

1. I've noticed the circle plastic around the door locks are fading, cracking, and look horrible. What is this for and what are the ways people have dealt with fixing it?

2. Additionally I've noticed two types of door turbo logos and wanted to know the difference. Mine just says "TURBO", but I've seen others that say lambda turbo, like "λ TURBO". Did the different logos come on different years?

ImageIMG_20190106_151648 by Nathanael Burton, on Flickr

Thanks!

Re: Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 9:55 pm
by Jay-Kay-Em
Hey mathrock,

Wow, a 480 in the US... people must think its a spaceship! Just like when I went crazy when I saw a 780 over here.

I'm gonna have a go answering a question rather than lurking!

1) That ring, according to my sales brochure, should illuminate. I would imagine its made out of a translucent material. Obviously they used the same plastic as the tail lights :lol:

You could paint it, but obviously you'd lose the translucent element.

2) Yes, the turbo door badge is date related. Just TURBO, like yours, is the late version. The λ symbol is the early version. Volvo made a big deal of catalytic convertors fitting them way before anyone else, hence 'showing off' with the lambda symbol from 1990 (?). By 1994, everyone was fitting cats, so no one cared. To be fair, only 1% of the general public knew the automotive reason for the lambda symbol anyways!

The parts catalogue may give a VIN break point for the badge. I think it was part of the 'facelift' that lost the bumper stripes, gave clear front indicators, and changed the front fog light glass.

Kind Regards,

Jay.

Re: Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 10:12 pm
by jamescarruthers
Sorry to correct you Jay but the white ring doesn't illuminate. The illumination to help find the key hole is just the aperture the key goes. This is missing on Mathrock's picture. The lock may still illuminate, the missing part is just to keep dirt out of the door lock.

I don't have a solution to the faded ring however and would be interested in hearing solutions also. ‎

Re: Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 10:27 pm
by Jay-Kay-Em
:rofl: fail

I’ll go back to lurking

Hopefully I’m right about the turbo badge :wink:

Re: Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 10:47 pm
by jifflemon
jamescarruthers wrote:
Sun Jan 06, 2019 10:12 pm
Sorry to correct you Jay but the white ring doesn't illuminate. The illumination to help find the key hole is just the aperture the key goes. This is missing on Mathrock's picture. The lock may still illuminate, the missing part is just to keep dirt out of the door lock.

I don't have a solution to the faded ring however and would be interested in hearing solutions also. ‎
Joerp does replacement rings.

Re: Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 11:11 pm
by jamescarruthers
Jay-Kay-Em wrote:
Sun Jan 06, 2019 10:27 pm
:rofl: fail

I’ll go back to lurking

Hopefully I’m right about the turbo badge :wink:
I think you are right on the lambda sign. Obviously it wasn't there on the earlier non-cat cars, then they were very proud of cats so put the lambda on everything,then everything had a cat so they didn't bother.

Image

No more lurking, get yourself to the May meet with us!

Re: Door lock trim and door turbo logo

Posted: Sun Jan 06, 2019 11:17 pm
by jamescarruthers
jifflemon wrote:
Sun Jan 06, 2019 10:47 pm
Joerp does replacement rings.
Good to know!

Here is his pricelist:
Image

Re: Door lock trim and door turbo logo

Posted: Mon Jan 07, 2019 12:39 pm
by Alan 480
mathrock wrote:
Sun Jan 06, 2019 9:04 pm
I just got a 1993 Volvo 480 Turbo imported into the US. Since it's finally in my possession I have time to fix up the little odds and ends that are broken.

1. I've noticed the circle plastic around the door locks are fading, cracking, and look horrible. What is this for and what are the ways people have dealt with fixing it?

2. Additionally I've noticed two types of door turbo logos and wanted to know the difference. Mine just says "TURBO", but I've seen others that say lambda turbo, like "λ TURBO". Did the different logos come on different years?

ImageIMG_20190106_151648 by Nathanael Burton, on Flickr

Thanks!
I just 'coloured it in' with a black felt pen, seems to last for about a year, depends on which side, car sits same way in drive so N/S always fades faster, I guess I could just paint it :wink:

Re: Door lock trim and door turbo logo

Posted: Mon Jan 07, 2019 1:37 pm
by mathrock
jamescarruthers wrote:
Sun Jan 06, 2019 11:17 pm
jifflemon wrote:
Sun Jan 06, 2019 10:47 pm
Joerp does replacement rings.
Good to know!

Here is his pricelist:
Image
Are there any pictures of the replacement lock rings? How does one order from Joerp?

Re: Door lock trim and door turbo logo

Posted: Mon Jan 07, 2019 3:13 pm
by jamescarruthers
I don't have any pictures, sorry. I will PM you his email address.