Hi guys,
i have kind of touched on this subject in the VOC forums, as small rust bubbles are comming up from under the paint, the metal work feels solid still, the paint not so much. i have smeared grease on this to cease its progression.
Im teaching myself the painting process - at the same time trying to achieve a qulaity job for as little as possible.
firstly i want to know is a rattle can just as good as a spray up with a spray gun?
secondly what is the paint process with the spray gun? so far i figure you need several guns or a gun that takes several nozzles, im really not sure what size nozzles i need for each stage is there a definitive list of the bare essential equipment i need?
third, what is the best paint process? so far i figure its
rub down to bare metal in the area i want to correct/respray
mask off any areas that i dont want any paint
wet n dry with 3000 grit and wipe clean
then put on a wet coat - what is this? just water?
put on a primer (is it just one coat?)
put on the first coat of paint, giving a 50% overlap
leave to dry and correct any mistakes or runs
second layer of paint
then 2 layers of laquer
have i got my methodology right? also with metallic paint are there any things to look out for over spraying a solid colour?
my paint code is 327
im saving to get a devilbliss startingline kit or a gun with several different size nozzles - have you guys got any recommendations on sprayguns and metallic painting techniques? much appreciated
Andrew
spraying and painting metallic - teach me
Moderators: jifflemon, coyote1980, Rachel
-
- 480 Newbie
- Posts: 41
- Joined: Fri Oct 04, 2013 8:34 am
spraying and painting metallic - teach me
What good music needs is full deep bass to give it warmth
- jamesy12345
- 480 Veteran
- Posts: 753
- Joined: Tue Apr 03, 2012 5:49 am
- Location: Durham, England
Re: spraying and painting metallic - teach me
Welcome over here matey!! Sorry but I am absolutely helpless with paint work.....which is going to turn into a bit of a problem soon as I am just about to get a couple of 80's French cars :S
Current:
Volvo S60 '04
Renault 21 '91
Subaru Legacy '05
Mazda RX-7 '93
Renault 5 '84
Previous:
440 2 litre, 440 Turbo, 460 Turbo, 480 Turbo x2, 854 T-5R, S40 T4, V40 T4, S70 T5 & R, V70 R x2, S60 R
Volvo S60 '04
Renault 21 '91
Subaru Legacy '05
Mazda RX-7 '93
Renault 5 '84
Previous:
440 2 litre, 440 Turbo, 460 Turbo, 480 Turbo x2, 854 T-5R, S40 T4, V40 T4, S70 T5 & R, V70 R x2, S60 R
- doingitsideways
- 480 Expert
- Posts: 659
- Joined: Wed May 02, 2012 8:55 pm
- Location: Manchester
Re: spraying and painting metallic - teach me
WTF are you doing around these parts?!
This is an exclusive club you know, not sure your sort would be welcome!
Lol!!
Only joking Andrew, welcome along
Afraid I can't help with paint either. A few to speak to over the road would be Steve and his 244, John h and TC.
Hope this helps.
Oh, James... What ELSE have you bought now?!
You're ill man, plain and simple!!
Steve
This is an exclusive club you know, not sure your sort would be welcome!
Lol!!
Only joking Andrew, welcome along
Afraid I can't help with paint either. A few to speak to over the road would be Steve and his 244, John h and TC.
Hope this helps.
Oh, James... What ELSE have you bought now?!
You're ill man, plain and simple!!
Steve
"If you can't fix it with a hammer, it's an electrical fault!"
Hammers can't fix a 480!!!
Hammers can't fix a 480!!!
- jamesy12345
- 480 Veteran
- Posts: 753
- Joined: Tue Apr 03, 2012 5:49 am
- Location: Durham, England
Re: spraying and painting metallic - teach me
I can't say til it arrives........need to sell some, drowning here
Current:
Volvo S60 '04
Renault 21 '91
Subaru Legacy '05
Mazda RX-7 '93
Renault 5 '84
Previous:
440 2 litre, 440 Turbo, 460 Turbo, 480 Turbo x2, 854 T-5R, S40 T4, V40 T4, S70 T5 & R, V70 R x2, S60 R
Volvo S60 '04
Renault 21 '91
Subaru Legacy '05
Mazda RX-7 '93
Renault 5 '84
Previous:
440 2 litre, 440 Turbo, 460 Turbo, 480 Turbo x2, 854 T-5R, S40 T4, V40 T4, S70 T5 & R, V70 R x2, S60 R
- doingitsideways
- 480 Expert
- Posts: 659
- Joined: Wed May 02, 2012 8:55 pm
- Location: Manchester
Re: spraying and painting metallic - teach me
But you're sh1t at selling!
"If you can't fix it with a hammer, it's an electrical fault!"
Hammers can't fix a 480!!!
Hammers can't fix a 480!!!
- jamesy12345
- 480 Veteran
- Posts: 753
- Joined: Tue Apr 03, 2012 5:49 am
- Location: Durham, England
Re: spraying and painting metallic - teach me
You're not wrong there but Acidic Davey's been giving me tips on making adverts
Current:
Volvo S60 '04
Renault 21 '91
Subaru Legacy '05
Mazda RX-7 '93
Renault 5 '84
Previous:
440 2 litre, 440 Turbo, 460 Turbo, 480 Turbo x2, 854 T-5R, S40 T4, V40 T4, S70 T5 & R, V70 R x2, S60 R
Volvo S60 '04
Renault 21 '91
Subaru Legacy '05
Mazda RX-7 '93
Renault 5 '84
Previous:
440 2 litre, 440 Turbo, 460 Turbo, 480 Turbo x2, 854 T-5R, S40 T4, V40 T4, S70 T5 & R, V70 R x2, S60 R
-
- Started learning about 480
- Posts: 54
- Joined: Thu Sep 19, 2013 12:56 pm
Re: spraying and painting metallic - teach me
like spraying pledge on to a mohogany effect writing desk.
seriously though, get all the pre preperation flatted down flawlessly, air movement carefully controlled, temperature differential of car and air perfect, equipment primed up and hope for the best because it will turn out anyhow as to a good match.
seriously though, get all the pre preperation flatted down flawlessly, air movement carefully controlled, temperature differential of car and air perfect, equipment primed up and hope for the best because it will turn out anyhow as to a good match.