Somebody has a old seal lying around from the rear clusters ??
Need to know cause I am trying to make several (more than 2) new seals.
thanks and greetz
thickness original sealant rear clusters
Moderators: jifflemon, coyote1980, Rachel
-
- 480 Expert
- Posts: 668
- Joined: Sun Dec 08, 2002 7:13 pm
- Location: Helmond, birthplace of the 480
thickness original sealant rear clusters
Flamered GT-Turbo 09-1995, Yellow Koni's, Intrax springs,Palm Beach,rear speakers,middle arm rest,Roboumod,Vega's, CT 906 radio/cd with 850 R amplifier, Pioneer speakers allround.
Hausser front and rear bumper, Black Diamond sport clutch, lightened flywheel, flowed head.Audi TT recirc.Stainless Cat replacement, K&N airfilter,Magnecor KV85,NGK colder plugs.
Soon ; Audi/VW calippers, 280mm Renault Sport brake discs and Ferodo DS2500 pads.
New project : 1987 Silver 480 with B18E engine
Hausser front and rear bumper, Black Diamond sport clutch, lightened flywheel, flowed head.Audi TT recirc.Stainless Cat replacement, K&N airfilter,Magnecor KV85,NGK colder plugs.
Soon ; Audi/VW calippers, 280mm Renault Sport brake discs and Ferodo DS2500 pads.
New project : 1987 Silver 480 with B18E engine
-
- Advanced 480 rookie
- Posts: 509
- Joined: Mon May 04, 2009 2:53 pm
.
il have a set if you make em. what with rubber?
-
- Can tell where the 480 was built
- Posts: 377
- Joined: Sat Jun 14, 2008 7:18 am
- Location: Southampton
Seals
Me too. Definitely!! Sorted my leaks out with a tube of sealant but it would look a whole lot better just sealed properly.
-
- Advanced 480 rookie
- Posts: 509
- Joined: Mon May 04, 2009 2:53 pm
.
i used sealant on my last car. seals very well but i wouldnt want to try and get em out if needed