Movement in front struts,

Springs, shock absorbers, wheels. Questions about this can be asked in this category.

Moderators: jifflemon, coyote1980, Rachel

Post Reply
MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Movement in front struts,

Post by MatBat » Sun Jan 04, 2004 11:53 am

There seems to have been movement in my left side front strut, as indicated by movement of bolts 'see image' could this have been caused be the previous owner having a prang? how can I remedy this?

Image

Soory. not very good pic, you can see where the paint has chipped through movement of the two bolts.

Also, excuse my ignorance, but should the shocks top end, bits that come up in the middle of the bolts, in pic, move up and down when you push down on the suspension?

Many thanks

MatBat
1996 Mini Classic 1275.

User avatar
volvofox
480 Is my middle name
Posts: 2034
Joined: Sun Jan 19, 2003 2:18 pm
Location: Born, Netherlands
Contact:

Post by volvofox » Sun Jan 04, 2004 1:50 pm

did you have an engine-gearbox or clutch change ?
some people lower the subframe, complete with shocks.

anyway, I would not lie awake from this. Probably nothing.
luck,
JPF


Nomen est Omen

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Sun Jan 04, 2004 2:05 pm

The handling of the car has been reduced and it pulls to the left quite serverely, may just need wheel aligning
1996 Mini Classic 1275.

king_j
480 Rookie
Posts: 428
Joined: Sun Oct 05, 2003 10:01 pm

Post by king_j » Sun Jan 04, 2004 2:10 pm

do u just mean the nuts are moving?

what type of play is it, tighten all bolts on the strut top, then jack the wheel up and grab the top of the wheel and pull up like the cars hitting a bump in the road, if you see the strut rubber move in the same direvction your strut top mount is away, not costly to replace and it will have all the things you says its doing (pulling etc)
***CAR FOR SALE 2K AND ITS YOURS***

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Sun Jan 04, 2004 2:14 pm

The rubber bit (both sides) is moving about .5cm when I push down on the front of the car.
1996 Mini Classic 1275.

king_j
480 Rookie
Posts: 428
Joined: Sun Oct 05, 2003 10:01 pm

Post by king_j » Sun Jan 04, 2004 5:10 pm

oh, well do what i said and jack it up and try it if ja can make it move with your strength then id suggest changing them, they should not move at all.

well not with human strength.

one of mine is away and needs changin
they are only about £30 though so not a tough/expensive job.
***CAR FOR SALE 2K AND ITS YOURS***

User avatar
volvofox
480 Is my middle name
Posts: 2034
Joined: Sun Jan 19, 2003 2:18 pm
Location: Born, Netherlands
Contact:

Post by volvofox » Sun Jan 04, 2004 11:45 pm

sorry, i was wrong, as you say also the handling changed, please (have a?) look at this soon !
luck,
JPF


Nomen est Omen

king_j
480 Rookie
Posts: 428
Joined: Sun Oct 05, 2003 10:01 pm

Post by king_j » Mon Jan 05, 2004 12:06 am

its not a major life or death thing like, just makes the car handle like crap. and makes if fell loose and bumpy over bumps.
***CAR FOR SALE 2K AND ITS YOURS***

sakis480
Knows an Aerodeck isn't a 480
Posts: 294
Joined: Wed Feb 19, 2003 12:45 pm
Location: Athens,GR

Post by sakis480 » Mon Jan 05, 2004 6:17 am

Hi there!! I do agree with king_j just replace them.... i v changed them 5 months ago..the handling of the car improved so much...having the old ones on, i could se them moving as yours...

luck sakis

User avatar
kirsty_2003
Advanced 480 rookie
Posts: 545
Joined: Mon Nov 17, 2003 4:31 pm

Post by kirsty_2003 » Tue Jan 06, 2004 12:47 pm

could it be that you've hit too many kerbs? that messes up the struts ;)

mine pulls to the left.... its annoying. it has done it since i brought the thing
I want a 480 :(

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Tue Jan 06, 2004 1:02 pm

kirsty_2003 wrote:could it be that you've hit too many kerbs?
I beg your Pardon! Me hitting a kerb! :angry:

I am deeply hurt by that. :cryhard:
1996 Mini Classic 1275.

User avatar
kirsty_2003
Advanced 480 rookie
Posts: 545
Joined: Mon Nov 17, 2003 4:31 pm

Post by kirsty_2003 » Tue Jan 06, 2004 1:19 pm

I'm sorry baby......
:cry:
Maybe the person before couldnt drive very well and hit too many kerbs?

You are a good driver...... ;)
I want a 480 :(

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Tue Jan 06, 2004 1:25 pm

Thats okay :

The previous owner wasn't exactly Jackie Stewart :)
1996 Mini Classic 1275.

king_j
480 Rookie
Posts: 428
Joined: Sun Oct 05, 2003 10:01 pm

Post by king_j » Tue Jan 06, 2004 3:28 pm

no its just general wear an tare (spelling)

too many speed bumps etc etc all causes them to wear.
***CAR FOR SALE 2K AND ITS YOURS***

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Tue Jan 06, 2004 3:34 pm

Had them checked, and they are fine.

Getting allignment done asap

Thanks for the help though Guys
1996 Mini Classic 1275.

Post Reply