What cars will my 480 wheels fit?
Moderators: jifflemon, coyote1980, Rachel
-
- Started learning about 480
- Posts: 92
- Joined: Wed Feb 02, 2005 4:18 pm
- Location: Oldham
- Contact:
What cars will my 480 wheels fit?
Hi. I am buying a renault clio RSi on Thursday and was wondering if my 480 wheels would fit (both are 4 stud).
Also, the 480es is for sale as spares or repair. It got bumped when we had the Snow and needs a new door and wing on drivers side. All electrics work and the engine is great for overn 100 mph. I want an offer of about 100, so if you want a car that is great for spares or to repair, Give me an offer.
Either in here or Email me @ tinyuk@gmail.com.
edited by volvo-bigbrother - Moved to Springs and Wheels (70) forum
Also, the 480es is for sale as spares or repair. It got bumped when we had the Snow and needs a new door and wing on drivers side. All electrics work and the engine is great for overn 100 mph. I want an offer of about 100, so if you want a car that is great for spares or to repair, Give me an offer.
Either in here or Email me @ tinyuk@gmail.com.
edited by volvo-bigbrother - Moved to Springs and Wheels (70) forum
Bog Standard 1992 Black 480ES 1.7
"I never realised Driving could be such FUN!!!"
"I never realised Driving could be such FUN!!!"
- Jamo
- 480 Is my middle name
- Posts: 1487
- Joined: Fri Jan 31, 2003 2:01 pm
- Location: Birmingham - UK
- Contact:
It's not just the PCD and offset you have to comapre the centre bore size to make sure they are the sameSophie wrote:480 wheels fit golf cab, S5 GTT and clio S16
The Golf has a different centre bore size as does the Clio, they'd need spigot ring adpators to make them centre line up correctly
http://www.leightyres.co.uk/catalog/fitment.php
[img]http://img.photobucket.com/albums/0603/JamoDodger/Avatar/startrek-bluescreen.gif[/img]
Ex 480 Turbo owner, Currently own Audi S2 Avant running 500-600 bhp
Ex 480 Turbo owner, Currently own Audi S2 Avant running 500-600 bhp
- Jamo
- 480 Is my middle name
- Posts: 1487
- Joined: Fri Jan 31, 2003 2:01 pm
- Location: Birmingham - UK
- Contact:
Don't think you quite understood what i meant, as the centre bore on the 480 is smaller than the Clio they wont fit if the alloys were design to specifically fit the 480Tiny_UK wrote:Thanks for that site. Least i know i can get my 480 wheels on and i can keep a bit of it with me!
If you had spigot ring adaptors to fit them on the 480 (plastic rings on the inside of the alloys inbetween the bolt holes) then you can get the them on with new spigot ring adapators for the clio.
[img]http://img.photobucket.com/albums/0603/JamoDodger/Avatar/startrek-bluescreen.gif[/img]
Ex 480 Turbo owner, Currently own Audi S2 Avant running 500-600 bhp
Ex 480 Turbo owner, Currently own Audi S2 Avant running 500-600 bhp
- Ben Harris
- 480 Is my middle name
- Posts: 1163
- Joined: Wed Apr 30, 2003 5:18 pm
- Location: Cambridge, UK
- Contact:
Rather than fit spiggot rings, you'd need the bore hole machined larger, as the 480 has a 52mm bore, and the Clio has a 60mm bore, wouldn't you? Spiggot rings are for going the other way (larger to smaller) aren't they?
Ben.
Ben.
1998-2003 ... 1981 Austin Mini City
2003-2005 ... 1989 Volvo 480 ES (B18E)
2004-2006 ... 1994 Volvo 480 ES (B20F)
2006-2008 ... 1995 Mitsuibshi FTO GPX
2008-2008 ... 1994 Volvo 480 Turbo Auto (with RichMod)
2009-Onwards ... 1991 MK1 Eunos Roadster
2013-Onwards ... 1997 Subaru Impreza Turbo 2000 (Wagon)
2003-2005 ... 1989 Volvo 480 ES (B18E)
2004-2006 ... 1994 Volvo 480 ES (B20F)
2006-2008 ... 1995 Mitsuibshi FTO GPX
2008-2008 ... 1994 Volvo 480 Turbo Auto (with RichMod)
2009-Onwards ... 1991 MK1 Eunos Roadster
2013-Onwards ... 1997 Subaru Impreza Turbo 2000 (Wagon)
- Jamo
- 480 Is my middle name
- Posts: 1487
- Joined: Fri Jan 31, 2003 2:01 pm
- Location: Birmingham - UK
- Contact:
Thats what i said mateBen Harris wrote:Rather than fit spiggot rings, you'd need the bore hole machined larger, as the 480 has a 52mm bore, and the Clio has a 60mm bore, wouldn't you? Spiggot rings are for going the other way (larger to smaller) aren't they?
Ben.
If you read i said that if he had spig got rings on his existing alloys it would easy to adapt them to the Clio.
Machining the centre bore is not recommended but do-able, weakens the core strength of the wheel.
[img]http://img.photobucket.com/albums/0603/JamoDodger/Avatar/startrek-bluescreen.gif[/img]
Ex 480 Turbo owner, Currently own Audi S2 Avant running 500-600 bhp
Ex 480 Turbo owner, Currently own Audi S2 Avant running 500-600 bhp