I hit a large pothole the weekend and noticed the rear of my 480 was suddenly very unstable, pulled over and noticed the rear Panhard rod had actually snapped midway, Inspection did not show the rod was rusted and the break was clean
Managed to get home at slow speed but alas i have been unable to find a new rod - local Volvo dealer gave me part No - 3419865 but now unavailable from Volvo
Tried searching the internet but again no luck so can anyone offer advise regarding this part or even have one for sale new or secondhand, i have searched the local scrapyards but no 480S in stock
Bushes are available so a good secondhand rod would be fine,dare i say it, DO YOU THINK A WELDED AND SLEEVED ROD WOULD PASS THE MOT?
Any help or advise would be appreciated as i am as you can imagine off the road
Dennis
Poole Dorset
Pothole damage - Panhard rod
Moderators: jifflemon, coyote1980, Rachel
Re: Pothole damage - Panhard rod
rear panhard rod will also be shared with the 440/460,
I'm assuming the left to right not the pair at top running front to back?
if you had the pukka bushes and decent welder no reason why your panhard rod would not be as good as the Volvo one , especially as your one broke!
but a 'spliced' one is a fail so you need new steel tube for the bushes and a section of steel tube , unless you put the splice 'inside' and then plug weld through the old tube. . . . ., very grey area if not a downright 'fail'
I'm sure there are aftermarket 'adjustable rods available' no idea of price etc
quick google suggests that they are available for about £50 from 4x4 guys, so you need an idea of the total length you need and make a few phone calls, eg some of suzuki are pretty small and similar track so you might be lucky if looking for volvo parts don't help?
you could ask Arthy, I think he might have a spare?
not good practice to double post but really this would be better in 'wanted'?
I'm assuming the left to right not the pair at top running front to back?
if you had the pukka bushes and decent welder no reason why your panhard rod would not be as good as the Volvo one , especially as your one broke!
![Crying :cry:](./images/smilies/cry.gif)
but a 'spliced' one is a fail so you need new steel tube for the bushes and a section of steel tube , unless you put the splice 'inside' and then plug weld through the old tube. . . . ., very grey area if not a downright 'fail'
I'm sure there are aftermarket 'adjustable rods available' no idea of price etc
quick google suggests that they are available for about £50 from 4x4 guys, so you need an idea of the total length you need and make a few phone calls, eg some of suzuki are pretty small and similar track so you might be lucky if looking for volvo parts don't help?
you could ask Arthy, I think he might have a spare?
not good practice to double post but really this would be better in 'wanted'?
Alan
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
Re: Pothole damage - Panhard rod
As Alan has already said, a welded rod would fail...... sort of.
if your sleeve fitted the entire length of the rod and was welded at the eyelet ends, there's no way to tell it's repaired!
Good second hand one would probably be the best solution.
if your sleeve fitted the entire length of the rod and was welded at the eyelet ends, there's no way to tell it's repaired!
Good second hand one would probably be the best solution.
- jamescarruthers
- 480 Is my middle name
- Posts: 2507
- Joined: Mon Jul 07, 2003 3:19 pm
- Location: Cambridge
Re: Pothole damage - Panhard rod
Keith Cooper has one for you and is closeish to you, in Bournemouth.
I'll PM you his number as he's not on here.
I'll PM you his number as he's not on here.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)
Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)
Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)
Re: Pothole damage - Panhard rod
Many Thanks for all your replies
I have since contacted and met Kieth who sold me the replacement Panhard rod i was after
It has now been fitted and we are back to normal
Special Thanks to James for finding me this hard to find part and Kieth for showing me his 2 fabulous 480s
I am now trying to recover my cost from the Local Authority
Dennis
I have since contacted and met Kieth who sold me the replacement Panhard rod i was after
It has now been fitted and we are back to normal
Special Thanks to James for finding me this hard to find part and Kieth for showing me his 2 fabulous 480s
I am now trying to recover my cost from the Local Authority
Dennis
- jamescarruthers
- 480 Is my middle name
- Posts: 2507
- Joined: Mon Jul 07, 2003 3:19 pm
- Location: Cambridge
Re: Pothole damage - Panhard rod
You're welcome Dennis. I was very happy to help.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)
Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)
Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)