After fitting the 17" wheels on the 480 turbo, I'm now planning to lower the car somewhat.
Now Ive read lots here ont he forum but can't find what I need.
- What kinds of brands are there?
- Who lowers how much?
- How do they perform (stifness and sagging)
I'm looking for -30mm springs seeing with 40mm the rear looks a bit to low (or it sertainly wil after a bit of sagging), also I want to prevent rubbing.
Std the front rideheight is more than in the rear, so the ideal lowering setup would be 40mm up front and 30mm at teh rear. I've found a set of springs that do 45/30 but those cost £140,- excluding shipping
Any advice and or info on the lowering springs you use? (preferably with some photo's of the car with the springs fitted)
The ultimate lowering springs topic
Moderators: jifflemon, coyote1980, Rachel
-
- Can tell where the 480 was built
- Posts: 372
- Joined: Sat Nov 15, 2003 6:55 pm
- Location: The Netherlands
- Contact:
The ultimate lowering springs topic
Volvo 480 GT-Turbo 1995 ~ 321 current
Volvo 480 Turbo 1994 ~ 305 got totalled
Volvo 480 GT-Turbo 1994 ~ 323 sold
Volvo 480 Turbo 1993 ~ 305 sold
Volvo 480 Turbo 1994 ~ 305 got totalled
Volvo 480 GT-Turbo 1994 ~ 323 sold
Volvo 480 Turbo 1993 ~ 305 sold
- Ben Harris
- 480 Is my middle name
- Posts: 1163
- Joined: Wed Apr 30, 2003 5:18 pm
- Location: Cambridge, UK
- Contact:
There are a couple of pictures of my last 480 fitted with Fintec 30mm lowering springs front and back, here, and here.
Ben.
Ben.
1998-2003 ... 1981 Austin Mini City
2003-2005 ... 1989 Volvo 480 ES (B18E)
2004-2006 ... 1994 Volvo 480 ES (B20F)
2006-2008 ... 1995 Mitsuibshi FTO GPX
2008-2008 ... 1994 Volvo 480 Turbo Auto (with RichMod)
2009-Onwards ... 1991 MK1 Eunos Roadster
2013-Onwards ... 1997 Subaru Impreza Turbo 2000 (Wagon)
2003-2005 ... 1989 Volvo 480 ES (B18E)
2004-2006 ... 1994 Volvo 480 ES (B20F)
2006-2008 ... 1995 Mitsuibshi FTO GPX
2008-2008 ... 1994 Volvo 480 Turbo Auto (with RichMod)
2009-Onwards ... 1991 MK1 Eunos Roadster
2013-Onwards ... 1997 Subaru Impreza Turbo 2000 (Wagon)
- Brasco
- 480 Is my middle name
- Posts: 2400
- Joined: Thu Jan 06, 2005 10:27 pm
- Location: Sat in a barrel of tits, sucking his thumb.
- Contact:
Hang fire, Lee's looking into doing some custom progressive -30mm stiffened springs. Group buy.
[img]http://img.photobucket.com/albums/v302/Brasco480/myelan3.jpg[/img][img]http://img.photobucket.com/albums/v302/Brasco480/SV400024rip-1.jpg[/img][img]http://img.photobucket.com/albums/v302/Brasco480/fc85e36c.jpg[/img][img]http://img.photobucket.com/albums/v302/Brasco480/SV400044-1.jpg[/img]
- Big Brother
- Moderator
- Posts: 5128
- Joined: Sun Sep 26, 2004 6:51 pm
- Location: North Wales
- hjkort
- Advanced 480 rookie
- Posts: 515
- Joined: Thu Sep 14, 2006 10:10 am
- Location: Didam, Netherlands
- Contact:
I fitted spring from INTRAX, but you can call any spring maker to ask for the springs that you need. Often they have springs that comply laying around, or else they can make them for you. (As said in a different spring topic)
[color=cyan]member 1968[/color]
[img]http://i113.photobucket.com/albums/n225/hjkort/banner3.jpg[/img]
[img]http://i113.photobucket.com/albums/n225/hjkort/banner3.jpg[/img]