hi
i will need to replace my shocks soon, i came across with this lowering kit
it says for 440/460 but aren't they all the same?
anyways, i'm mind-opened to any good sugestions on replacing the shocks.
i've just asked for prices, and for the sachs front shocks, 108€ (must be around 75£) EACH.. rear ones for 70€ EACH... errr, i don't think so...
What about this bilstein kit
Moderators: jifflemon, coyote1980, Rachel
- forkinthroat
- Knows where Volvo is from
- Posts: 141
- Joined: Fri Feb 28, 2003 6:18 pm
- Location: in that small paradise by the sea
What about this bilstein kit
'88 ES, black, red stripe, perfect idle....
- martinholmesuk
- Friend of Club 480 Europe
- Posts: 10049
- Joined: Thu Sep 05, 2002 9:43 pm
- Location: West Sussex
From the site
give them a call or just lower with standards/pi 40mm springs.
or give a call
OK just looked again
well it's standard bilstein shocks from what I can see. The picture is not standard but maybe it's wrong?Consists of four Bilstein Standard replacement Dampers and four lowering springs.
give them a call or just lower with standards/pi 40mm springs.
or give a call
OK just looked again
sounds the businessBilstein Streetline kit
Volvo 940 Turbo 19T (real Volvo :P)
Audi TT
Audi TT
- forkinthroat
- Knows where Volvo is from
- Posts: 141
- Joined: Fri Feb 28, 2003 6:18 pm
- Location: in that small paradise by the sea
sounds good doesn't it? i don't want to lower it 40mm. besides the look and hard ride, the police is on to this kind of changes. sadly this is the law. the IPO (= MOT) is also being very hard with tuned cars.
so the 30mm or 25 would be just perfect. anyway, this is going to take a couple of months. first, the brakes and IPO. going to the vented ones..
so the 30mm or 25 would be just perfect. anyway, this is going to take a couple of months. first, the brakes and IPO. going to the vented ones..
'88 ES, black, red stripe, perfect idle....