Hi,
Would anyone here know if the tracking angles / degrees / whatever are different on the 440 / 460 / 480 + turbo models.
The garage i've had mine tracked at states it is a 'Volvo 460' only. Also my steering wheel is off centre so i'd like it re-adjusted.
pol
Tracking 440/460/480/t
Moderators: jifflemon, coyote1980, Rachel
- robkendall
- 480 Is my middle name
- Posts: 2694
- Joined: Mon Mar 29, 2004 11:28 am
- Location: 2nd star on the left and straight on til morning
i thought that part of the tracking involved centering the wheels, and clamping some device on to keep it centered....then they adjust the wheels accordingly.....my garage do anyway.
not sure on angles/camber etc etc
rgrds
rob
not sure on angles/camber etc etc
rgrds
rob
Warning! This post may contain traces of humour, sarcasm or wit. In case of allergic reaction call 0800 123 456 for free and confidential abuse. [img]http://img.photobucket.com/albums/v192/saracen480/spank.gif[/img]
[img]http://img.photobucket.com/albums/v192/saracen480/armynewx.jpg[/img]
[img]http://img.photobucket.com/albums/v192/saracen480/armynewx.jpg[/img]
-
- 480 Is my middle name
- Posts: 3418
- Joined: Sun Dec 21, 2003 9:20 pm
- Location: Market Deeping
- Contact:
.
The correct setting is toeing out half a degree,plus or minus half a degree.
Thats not lowered
Mine lowered on 40mm PI springs needed to be set up normallly,then a degree and a half toeing in to compensate.
There ya go!
Steve
Thats not lowered
Mine lowered on 40mm PI springs needed to be set up normallly,then a degree and a half toeing in to compensate.
There ya go!
Steve
I'm No Longer Here :(
http://www.volvo-480-europe.org/forum/viewtopic.php?f=19&t=34359&start=20
http://www.volvo-480-europe.org/forum/viewtopic.php?f=19&t=34359&start=20