Hi!
I've been neglecting this forum for more than a year now, but I still hope someone in here would help me with my ABS problem
My 480 turbo -92 has a MKII ABS controller in the boot.
The flash code reads 3-4 indicating "Signal missing" from LH rear wheel sensor.
Could I measure the connections 24,6 in the MKII ECU to try to narrow down the problem?
Could it be a faulty cable, all the connectors in the ECU unit are clean and look OK.
ABS MKII flash code 3-4
Moderators: jifflemon, coyote1980, Rachel
- Captain Crunch
- Started learning about 480
- Posts: 91
- Joined: Sat Apr 29, 2006 11:16 pm
- Location: Storfors, Sweden
ABS MKII flash code 3-4
480's never die, they just transcend.
Jens Lumbye
Storfors, Sweden
Jens Lumbye
Storfors, Sweden
- Captain Crunch
- Started learning about 480
- Posts: 91
- Joined: Sat Apr 29, 2006 11:16 pm
- Location: Storfors, Sweden
Re: ABS MKII flash code 3-4
Fixed it! It was a faulty flywheel sensor. After replacing it works fine.
480's never die, they just transcend.
Jens Lumbye
Storfors, Sweden
Jens Lumbye
Storfors, Sweden