Hi all
just wacked some graphite grease on the gearbox bar under the car and it is 100% better and smoother.
it has two joints at each end of the main bar which were dry as a nuns **** but the question is at the gearbox end of the bar it seems there was a rubber boot or something which on mine is almost gone and very exposed,i have an old unused cv rubber boot(small)i was thinking of modifing it to replace the worn/cut one and bang it all up with a zippy tie or two and a wad load of grease.
not sure how yet but im not to worried as it usually works out as planned i hope
question is would this suffice as a repair or should it be done as new??
any tips on making it tip top id be happy for:)
put my cd player in 2day and didnt have to change connecters
all 4 speakers work well even being they standard ones and stopped the dash rattle at the same time BIG TIME DUCT TAPE hehe
just gotta work out how to install a bass tube
cheers all
sg
gearbox linkage
Moderators: jifflemon, coyote1980, Rachel
-
- Can tell where the 480 was built
- Posts: 308
- Joined: Mon Oct 17, 2005 6:41 pm
- Location: uk.bordon
gearbox linkage
480 for life!!
1X)2 tone (silver/green)480ES 92 1.7i (140.000miles)(dead!!!
1x 480 es two tone silver/green 1992 1.7i(126.000)alive!!!godlike:)SOLD:(
1X)2 tone (silver/green)480ES 92 1.7i (140.000miles)(dead!!!
1x 480 es two tone silver/green 1992 1.7i(126.000)alive!!!godlike:)SOLD:(