I've had a look through a lot of threads on here but not come up with an exact answer! I have a '91 ES fitted with a B18FP (cat+lambda) what diameter clutch should this have? It's nearing the end of its days but still has a bit of life left but without removing the box ect what size should I expect?
Or is this a question thar can only be answered on inspection?
Cheers!
B18FP clutch/flywheel size!
Moderators: jifflemon, coyote1980, Rachel
-
- Can tell where the 480 was built
- Posts: 317
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
B18FP clutch/flywheel size!
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
Re: B18FP clutch/flywheel size!
Go on to eurocarparts enter your reg number select parts clutch kits and then click on details and it will give your diameter , number of splines and engine type .
=> problem solved and this weekend they have a BIG discount as well
=> problem solved and this weekend they have a BIG discount as well
-
- Can tell where the 480 was built
- Posts: 317
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
Re: B18FP clutch/flywheel size!
You sir are a don,
why didn't i think of that! haha cheers
why didn't i think of that! haha cheers
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
-
- Can tell where the 480 was built
- Posts: 317
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
Re: B18FP clutch/flywheel size!
quick search shows up as below:
Diamter (mm) : 200
Number of Teeth : 26
Plate Diamter (mm) : 200
Engine code B18 EP
next question i'll need to find an answer too... how to upgrade to 215...
alternatively, if i went down the 'custom made clutch' route, i could stick with a 200mm diamter but have a better friction material used? and have the pressure plate uprated?
Diamter (mm) : 200
Number of Teeth : 26
Plate Diamter (mm) : 200
Engine code B18 EP
next question i'll need to find an answer too... how to upgrade to 215...
alternatively, if i went down the 'custom made clutch' route, i could stick with a 200mm diamter but have a better friction material used? and have the pressure plate uprated?
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
-
- Can tell where the 480 was built
- Posts: 317
- Joined: Sat Jan 11, 2014 3:44 pm
- Location: Aberdeenshire, Huntly
Re: B18FP clutch/flywheel size!
Excellent! I know what I must do.... Haha
'91 480 ES 2.0l 16v 'Williams' Conversion - 212bhp/230nm
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium
'90 940 GL 2.0l Estate
'08 XC90 D5 SE Premium