CEm dead

From CEM to VEM, from LED to lightbulb and more. If you have an electrical problem, like a broken info-centre, search for answers in this category. This is also the place to be when you expect the problem to be of an electrical nature...

Moderators: jifflemon, coyote1980, Rachel

User avatar
volvofox
480 Is my middle name
Posts: 2034
Joined: Sun Jan 19, 2003 2:18 pm
Location: Born, Netherlands
Contact:

Post by volvofox » Thu Dec 11, 2003 12:40 am

if the info center missies some volts, I mean there are not enough due to unsufficient ground (I heard you speak about some voltage at the radio wires, the must be at least near 12 volts !

I don't believe its the halogen, since you would be able to see some. at least with a torch.

I think its a dirty connection somewhere. either the ground, or the current. any ways, it sill can be broken 18 pin connector weldings at the inside of the clockhouse print
luck,
JPF


Nomen est Omen

jamwor007
Started learning about 480
Posts: 52
Joined: Tue Sep 17, 2002 7:10 pm

Post by jamwor007 » Thu Dec 11, 2003 8:38 am

thanks all well. Have the day off tomorrow so will attack it from all angles
.And hopefully get things sorted out .gor new bulbs for running lights . and they will both light up with full brightsness.but when try to puty up lights.One goes dim and the other goes off so belive its wiring or connectors not reley but will update tomorrow cheers all

MatBat
480 Is my middle name
Posts: 2684
Joined: Thu Oct 09, 2003 7:16 pm
Location: Chichester, West Sussex
Contact:

Post by MatBat » Thu Dec 11, 2003 8:40 am

Hope you get it sorted!

Best of Luck! :D
1996 Mini Classic 1275.

User avatar
volvofox
480 Is my middle name
Posts: 2034
Joined: Sun Jan 19, 2003 2:18 pm
Location: Born, Netherlands
Contact:

Post by volvofox » Thu Dec 11, 2003 8:04 pm

for uk specs or on late 480's they have to go dim. both of them, as you pop up.
luck,
JPF


Nomen est Omen

Post Reply