Central locking still wont work!

catgroom · Post by **catgroom** » Sat Apr 30, 2005 4:35 pm

Ive finally put my new passenger side solenoid in,and still my central locking wont operate using drivers door lock!

Any ideas anyone???

felyx · Post by **felyx** » Sat Apr 30, 2005 6:39 pm

hiya steve maybe its the power going to the door just like the rear wiper and heated rear windscreen, is 12volts coming through the door???

cheers tim

mogge · Post by **mogge** » Sun May 01, 2005 4:32 am

Hi!

If you have a 480 up til 91, you have a switchbraker in the drivers door. You shoud be able to hear the contacts working when locking/unlocking the door. This unit sends a signal to the pass doormotor. The switch has a timer function and operates for a second.

Its not unusual you have a cabel break in the door/chassie opening.

/Jonas

Murf · Post by **Murf** » Sun May 01, 2005 2:33 pm

yes, bit he's getting a voltage reading at the wires at the pass side motor when he locks/unlocks the drivers door. did you try the motor with the wires connected but with the linkage disconnected??
maybe the linkage is bindige with the way you fitted it and stops the motor working??