From CEM to VEM, from LED to lightbulb and more. If you have an electrical problem, like a broken info-centre, search for answers in this category. This is also the place to be when you expect the problem to be of an electrical nature...
Moderators: jifflemon, coyote1980, Rachel
-
MatBat
- 480 Is my middle name
- Posts: 2684
- Joined: Thu Oct 09, 2003 7:16 pm
- Location: Chichester, West Sussex
-
Contact:
Post
by MatBat » Fri Nov 21, 2003 12:46 pm
My reversing lights have stopped working but the bulbs and fuse look fine.
I am thinking that it could be a sensor when you put the car into reverse.
Does anyone know where this is?
1996 Mini Classic 1275.
-
strangegame
- 480 Expert
- Posts: 623
- Joined: Sun Nov 09, 2003 7:09 pm
- Location: Scotland
Post
by strangegame » Fri Nov 21, 2003 12:55 pm
i think the switch is under the car
-
gerrsvolvo
- Knows an Aerodeck isn't a 480
- Posts: 283
- Joined: Wed Sep 18, 2002 7:08 am
Post
by gerrsvolvo » Fri Nov 21, 2003 12:57 pm
Check
1e- if the wires are on the switch in the gearbox.
2e- if the current is getting at and through the fusebox
3e- if the current is getting to the buldholder
4e- if there is any corosion in the bulbholder
Good lUck
gerrsvolvo
-
MatBat
- 480 Is my middle name
- Posts: 2684
- Joined: Thu Oct 09, 2003 7:16 pm
- Location: Chichester, West Sussex
-
Contact:
Post
by MatBat » Fri Nov 21, 2003 1:07 pm
2-3 and 4 are confirmed fine so I will check under the car.
Yhanks for the help
1996 Mini Classic 1275.
-
MatBat
- 480 Is my middle name
- Posts: 2684
- Joined: Thu Oct 09, 2003 7:16 pm
- Location: Chichester, West Sussex
-
Contact:
Post
by MatBat » Fri Nov 21, 2003 2:56 pm
Fixed it!
It was the connections to the sensor, on the side of the gearbox.
One had fallen off.
1996 Mini Classic 1275.